The ace series of USB3 Vision cameras offer fantastic value for very challenging applications (e.g. microscopy, medical technology, transport technology). This model contains a PYTHON 5000 CMOS sensor from ON Semiconductor. It combines excellent resolution with a high frame rate at a very reasonable price. The 1" sensor contains 2590 x 2048 pixels, and delivers up to 60 frames per second at full resolution. With a compact 29 x 29 x 29 mm housing, this camera is even smaller than Basler's GigE models.
With USB3 Vision, a single cable supplies camera power and transfers data between the camera and PC. An auxiliary connector provides termination for the input and output signals.
The Basler ace provides a full set of features to address a wide range of applications. Pixel data can be output in 8 or 12 bit depth. You may adjust the camera’s black level, gain, area of interest, input debounce, and trigger delay. It features automatic exposure control, pixel binning, horizontal image mirroring, event reporting, sending of test images, and a programmable lookup table. There are also “chunk” features that include a frame counter, time stamp, trigger input counter, and CRC checksum calculator. Note that not all features may be available when using third-party software.
Because this camera is USB3 Vision and GenICam complaint, there are many third party software applications and API’s that are compatible. Basler offers their royalty-free Pylon SDK for 32 and 64 bit Windows and Linux platforms.
|Sensor Resolution:||2592 (h) x 2048 (v) pixels|
|Sensor Size:||15.86 mm (1")|
|Sensor Model:||ON Semi Python 5000|
|Frame Rate (full resolution):||60 frames/second|
|Quantum Efficiency:||55.0 %|
|Dark Noise:||11.4 e-|
|Saturation Capacity:||7.9 ke-|
|Dynamic Range:||56.8 dB|
|Signal-to-Noise Ratio:||39.0 dB|
|Test Method:||EMVA 1288|
|USB Micro-B Receptacle (Male)||USB 3.0 Only (5 Gbps)||Qty 1|
|Hirose 7mm 6 Pin Receptacle HR10A-7R-6PB (Male)||Qty 1|