Image shows a Basler

CRBR105

Basler

USB 3.1 Hub, 4 Port

Price: $88.00 each

Not available for purchase outside of North America.

Please sign in to check inventory.

4-port high-performance hub
Screw connection for securing cables
Includes cable for connecting to a computer
Excludes power supply

This 4-port USB 3.1 Gen 1 hub is recommended for connecting multiple USB3 Vision cameras to a computer. It includes a 1-meter cable for connecting the hub to a computer. A 12 VDC power supply is sold separately.

This hub has one USB 3.1 upstream port and 4 USB downstream ports. The maximum (USB 3.1 Gen 1) data rate of 380 MBps is available at the upstream port. All ports also support USB 2.0. Because all connected devices share bandwidth, maximum camera frame rates may be limited. (Please see datasheet on Resources tab for details.)

Downstream ports include over-current detection.

Loading...

Electrical

Input Power: 9 - 24 VDC, 8.0A max
DC Input Connector: Mini Combicon
Downstream Port Power: Each port supplies up to 2.1A max. with per-port power switching and over-current notification.
Upstream Bandwidth: SuperSpeed USB, High-Speed and Full-Speed Connections
Downstream Bandwidth: SuperSpeed USB, USB 2.0 Hi-Speed, Full-Speed, and Low-Speed

Environmental

Storage Temperature: 0℃ to 65℃ (32℉ to 149 ℉)
Storage Humidity: 10% to 80% (non-condensing)

Miscellaneous

Country of Origin: Taiwan ROC
US HTS Code: 8471804000

Connectors

Upstream Port: Standard B-type USB Receptacle with four M2x0.4 tapped holes (both 16.50 and 22.00 mm o.c.)
Downstream Ports: Four Standard A-type Receptacles with three M2x0.4 tapped holes (10.00 mm o.c. to sides, and 3.54 mm offset above)

Standards

Conformance USB Battery Charging 1.2

Loading...

Disabled resource link Datasheet (rev 2)


Sign In or Register to unlock all links above.

Please contact us for information about any manufacturer's warranty.

Items configured with options marked NC/NR cannot be canceled or returned. Special order items and open cartons cannot be returned unless defective as covered by the manufacturer's warranty. The return of item quantities exceeding that normally stocked by Machine Vision Store will be subject to a restocking fee. All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions.