The Leimac IHRA-150R ring light has red LEDs, an outside diameter of 154 mm, and an inside diameter of 90 mm.
The Leimac IHRA "Neo" ring lights deliver relatively diffuse illumination roughly parallel to the optical axis. They can work well when imaging materials that are not overly glossy or reflective. They succeed in avoiding the center hot-spot that is typical of other ring light designs.
The Neo ring lights are available in a nice variety of sizes, and with either white, red, or blue LEDs. Choose from either 12 volt or 24 volt models. The 12V models are compatible with our overdrive controllers, capable of producing very bright pulses of light.
The photo shown above is representative of the product series, but may show a different size. Please refer to the drawings for details.
|Drive Type:||Voltage Control|
|Window Size:||154 x 90 mm (6.1" x 3.5")|
|Operating Temperature:||0 - 40°C|
|Operating Humidity:||35 - 85% RH, non-condensing|
|Wavelength:||635 nm typical (Red)|
|Cable Length:||0.5 m (1.6 ft)|
|Connector:||SMR-02V-B (12V) or SMR-03V-B (24V)|
|Conformance||RoHS, China RoHS, CE IEC62471|
See Resources section below to download drawings.
Leimac, Ltd. warranties lights against failure for 2 years from date of factory shipment, and against a 50% or greater decrease from the specified intensity for 1 year from date of factory shipment. Warranty shall not apply if failure is due to connecting the light to equipment or a power supply made by a third-party, or other factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)