Image shows a Leimac ILP-30M2

LTLC9000 favorite

PWM Digital Controller, 30W 2 channel

Leimac ILP-30M2

$189.00 each

Available in US & Canada.

Please sign in to check availability.

Compact PWM controller delivers 30 watts
2 independent channels for 12 VDC lights
1000 digital intensity levels
24 VDC input power

The ILP-30M2 PWM constant-voltage light controller delivers up to 30 watts of power. Use it with 12 VDC constant voltage lights.

The Leimac ILP digital light controllers enable precise control of illumination intensity. Their compact, reliable design enables easy adjustment of two independent channels.

This constant-voltage type controller adjusts the pulse-width to vary intensity. Two lights can be connected, so long as the maximum power capacity is not exceeded.

In addition to the intensity knob, there is a power switch and channel switch on the front of the controller. Lock the optimal intensity by briefly pushing the intensity knob. The locked intensity value will be automatically recalled after a power interruption.

Two external 12 - 24 VDC signals can be used to enable or disable the ILP controller's two independent output channels. These are often used to strobe the connected lights for high-speed illumination, or simply to disable the lights when they are not needed.

The controller can either be mounted on a DIN rail, or on a bench using the optional stand.

Loading...

Electrical

Output Channels: 2
Control Interfaces: Manual
Control Method: Voltage Control, PWM
PWM Frequency: 80 KHz
Input Current: 1.5 A max.
Input Voltage: 24 VDC
Strobe Inputs: 12 - 24 VDC, one per channel, sink or source
Output Voltage: 12 VDC
Output Power: 30 W total

Mechanical

Weight: 100 g

Environmental

Operating Temperature: 0 - 40°C
Operating Humidity: 20 - 70%, non-condensing
Vibration Resistance: 98m/S^2 10-55 Hz in X,Y,Z. One hour test duration in each direction.
Impact Resistance: 98m/S^2 half-sine in X,Y,Z, tested 3 times.

Connectors

Output Connector: JST SMP-02V-BC, x2
Inputs / Power Connector: Spring-type terminal blocks (ML-700-NH-6P)

Standards

Conformance RoHS, CE

Loading...


See Resources section below to download drawings.

Disabled resource link Drawing (PDF)
Disabled resource link Drawing (DXF)
Disabled resource link Drawing (STEP)
Disabled resource link Manual


Sign In or Register to unlock all links above.

Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.

Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)