The Leimac IDGC-100M2 light controller is compatible with most constant voltage lights. It can deliver a total of 100 watts across its 2 output channels.
The IDGC light controllers are available in a large number of different configurations. We offer an appropriate controller for each installation, powering up to 8 independent channels with up to 150 watts.
Most models may be configured to have either an Ethernet, RS232, or combined 8-bit parallel / 0 - 5 VDC analog interface.
This controller has one high-speed input per channel that enables precision strobe control.
(The photo shown above is generally representative of the product family. Please refer to the drawing for dimensions and connectors.)
Loading...
Electrical
| Output Channels: | 2 |
| Control Interfaces: | Analog, Manual, Ethernet TCP/IP, Parallel, RS232 |
| Control Method: | Voltage Control, PWM |
| Input Voltage: | 100 - 240 VAC, 50/60 Hz |
| Output Voltage: | 12 VDC or 24 VDC, depending on model |
| Output Power: | 100 W Total |
| Output Channels: | 2 |
| PWM Frequency: | ~125 kHz (256 levels) |
| Variable Delay Range: | 1 μs intervals between 0 and 9000 μs. (Add to electrical input response time.) |
| Variable Output "On" Range: | Output can be triggered to remain "on" for 0.1 to 999.9 ms, in 0.1 ms intervals |
| Input Response: | High Mode Off to On: < 60 μs; High Mode On to Off: < 10 μs Low Mode Off to On: < 10 μs Low Mode On to Off: < 60 μs |
| Auto MDI/MDIX: | Standard (for Ethernet models) |
Environmental
| Operating Temperature: | 0 - 40°C |
| Operating Humidity: | 20 - 70%, non-condensing |
Miscellaneous
| Programming Function: | Up to 16 steps |
Connectors
| Light Connectors: | JST SMP-02V-BC (12 V) or JST SMP-03V-BC (24 V) |
| I/O Connector 1: | Omron XG4A-2631 |
| Power Connector: | IEC 60320 C14 "PC type" receptacle |
| Ethernet Connector: | RJ-45 (Ethernet models only) |
| RS232 Connector: | Hirose HR10G-7R-4S73 (RS232 models only) |
Standards
| Conformance | CE, UKCA, PSE |
Loading...
See Resources section below to download drawings.
Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)