Image shows a Leimac ILP-60M2-24

LTLC9001 favorite

Leimac ILP-60M2-24

PWM Digital Controller, 60W 2 channel

Compact PWM controller delivers 60 watts
2 independent channels for 24 VDC lights
1000 digital intensity levels
24 VDC input power

The ILP-60M2-24 PWM constant-voltage light controller delivers up to 60 watts of power. Use it with 24 VDC constant voltage lights.

The Leimac ILP digital light controllers enable precise control of illumination intensity. Their compact, reliable design enables easy adjustment of two independent channels.

This constant-voltage type controller adjusts the pulse-width to vary intensity. Two lights can be connected, so long as the maximum power capacity is not exceeded.

In addition to the intensity knob, there is a power switch and channel switch on the front of the controller. Lock the optimal intensity by briefly pushing the intensity knob. The locked intensity value will be automatically recalled after a power interruption.

Two external 12 - 24 VDC signals can be used to enable or disable the ILP controller's two independent output channels. These are often used to strobe the connected lights for high-speed illumination, or simply to disable the lights when they are not needed.

The controller can either be mounted on a DIN rail, or on a bench using the optional stand.

Discounted price available if purchased with a Leimac light.



Output Channels: 2
Control Interfaces: Manual
Control Method: Voltage Control, PWM
PWM Frequency: 80 KHz
Input Voltage: 24 VDC
Input Current: 2.5 A max.
Strobe Inputs: 12 - 24 VDC, one per channel, sink or source
Output Voltage: 24 VDC
Output Power: 60 W total


Weight: 100 g


Operating Temperature: 0 - 40°C
Operating Humidity: 20 - 70%, non-condensing
Vibration Resistance: 98m/S^2 10-55 Hz in X,Y,Z. One hour test duration in each direction.
Impact Resistance: 98m/S^2 half-sine in X,Y,Z, tested 3 times.


Output Connector: SMP-03V-BC, x2
Inputs / Power Connector: Spring-type terminal blocks (ML-700-NH-6P)


Conformance RoHS, CE

Are you purchasing this with a light

NL Without a light
WL With a light

Not available for purchase outside of US & Canada.

Please sign in to check inventory.


See Resources section below to download drawings.

Disabled resource link Drawing (PDF)
Disabled resource link Drawing (DXF)
Disabled resource link Drawing (STEP)
Disabled resource link Manual
Disabled resource link How to Strobe using Basler GigE Camera

Sign In or Register to unlock all links above.

Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.

Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)