Image shows a Leimac



Light Controller, GigE Vision, 4 PWM Channels

Not available for purchase outside of US & Canada.
Please contact us for a quote.
Power over Ethernet for simplified wiring
GigE Vision compliant
4-channel output

The Leimac IPPA-7M4G light controller is powered over Ethernet (PoE) for simplified installation requiring fewer cable runs. The outputs deliver up to 7.8 watts of power.

This controller drives up to four LED lights using constant-voltage 80 KHz PWM outputs. For stable illumination intensity, the PWM output is phase-synchronized with the trigger input.

This LED light controller will appear as a GigE Vision device on your camera network. Each light's parameters can be adjusted just as easily as your camera's parameters. As of September 2020, this controller has been successfully tested with current versions of GigE Vision software from Matrox, MVTec, and National Instruments.

Parameters can be set to adjust:

> Light on/off

> Trigger mode, continuous internal or triggered external mode

> Intensity, 0 to 100% in 256 steps

> Trigger delay time, 0 to 99.99 ms in 10 μs increments

> On duration, 0 to 99.99 ms in 10 μs increments

> Action pattern

The action pattern enables creation of multiple configuration sets, where each set can include an intensity, trigger delay, and on duration value. This flexibility may be useful when illuminating different part types.

The trigger cable and mini-DIN output cable are included. A LAN cable and a bracket for mounting on a 35 mm DIN rail are sold separately.



Output Channels: 4
Control Interfaces: Ethernet Genicam
Control Method: Voltage Control, PWM
Input Power: PoE, 320mA max. @ 48 VDC (IEEE802.3af)
PWM Frequency: ~ 80 KHz
Output Voltage: 12 VDC
Output Power: Total output current clamped at 7.8 W
Trigger Response: ~ 1 μs
Over-voltage Category: Category 1


Size: 71.0 x 35.5 x 50.4 mm
Weight: 140 g


Operating Temperature: 0 to 40 °C
Operating Humidity: 20 - 70%, non-condensing


GigE Vision Compliance: Compatible with GigE Vision software that supports GenICam SFNC version 2.4 or greater


Conformance RoHS, CE EN55011 Group1 ClassA, EN61000-6-2


Disabled resource link Manual (PDF)

Sign In or Register to unlock all links above.

Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.

Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)