The Basler Racer 2 S r2L4096-84g5m 5GigE Vision camera, built on the Gpixel GL3504 sensor, offers great value. Camera equipped with Front II (see drawing).
Basler racer 2 S line scan cameras are a great choice for factory automation and inspection installations. The Basler Racer 2 S cameras have a compact, slim industrial housing with a foot print of only 29 x 29 mm. Both the 2k and 4k models have a CMOS image sensor that is compatible with C-mount lenses, helping to minimize system cost. This camera's 5GigE interface enables higher line rates, as compared to a 1GigE interface.
Loading...
Electrical
| Power: | 5.8 W typical @ 12 to 24 VDC (PoE not supported) |
| I/O: | 1 opto-coupled input, 2 general purpose I/O |
Mechanical
| Lens Mount: | C-Mount |
| Weight: | < 100 g |
Environmental
| Ingress Protection: | IP30 |
| Housing temp. during operation: | -10 to 50 °C (14 to 122 °F) |
| Humidity during operation: | 20 to 80%, relative, non-condensing |
| Storage Temperature: | -20 to 80 °C (-4 to 176 °F) |
| Storage Humidity: | 20 to 80%, relative, non-condensing |
| Housing temp. per UL 62368-1: | max. 70 °C (158 °F) |
| Ambient temp. per UL 62368-1: | max. 30 °C (86 °F) |
Miscellaneous
| Sensor Resolution: | 4,096 (h) x 2 (v) pixels |
| Sensor Size: | 14.33 mm |
| Sensor Model: | Gpixel GL3504-CVM-NCN-AU1 |
| Chroma: | Monochrome |
| Shutter Type: | Global |
| Frame Rate (full resolution): | 84,000.0 frames/second |
| Data Interface: | Ethernet Gig-E Vision |
| Data Rate: | Gigabit Ethernet x2 cables |
| Synchronization: | Hardware trigger, software trigger, or free-run |
| Conformance: | CE (includes RoHS), UKCA, EAC (in preparation), UL Listed, FCC, KC (in preparation), GenICam, GigE Vision |
| Country of Origin: | Germany |
| US HTS Code: | 8525893000 |
Connectors
| Data Connector: | RJ-45 |
| I/O Connector: | M8 6-pin female, A-coded |
Learn about camera specs in our Camera Tech Center.
Loading...
This camera is warranted by the manufacturer to be free from defects in materials and workmanship under normal use for a period of three (3) years from the date of original factory manufacture.
Small quantities of cameras normally stocked by Machine Vision Store may be returned within 30 days, subject to a 20% restocking charge, if original package is unopened and in new condition. Larger quantities are subject to Basler's 40% restocking charge. Open packages may not be returned.
