This network adapter has two 10 Gbit Ethernet ports to enable communication with high-resolution, high-frame-rate cameras, as well as other devices. The familiar twisted-pair copper cable and RJ-45 connectors keep installation costs to a minimum. The Intel® X550-AT2 conrroller supports 15.5 KB jumbo frames and NIC teaming. It is also backwards compatible with NBASE-T and 1000BASET networks.
This adapter's IEEE 802.3at PoE+ capability enables powering devices over Ethernet. Up to 25.5 watts is available per port. Power to each port can be independently switched on and off via the free software API.
|Ports:||Two 10 BgE with Intel® X550-AT2 controller|
|Jumbo Frames:||Up to 15.5 KB|
|Teaming:||Yes (load balancing and failover)|
|PoE||IEEE 802.3at-2009 PoE+, up to 25.5 W per port|
|Power Load:||11.5 W, plus up to 51 W total for connected PoE devices|
|Cable Requirement, 10 GBASE-T:||Use CAT 6a for 100 meters, or CAT 6 for 55 meters|
|Cable for 5Gbps NBASE-T:||Use CAT 6 for 100 meters|
|Cable for 2.5 Gbps NBASE-T:||Use CAT 5e for 100 meters|
|Dimensions:||167.7 mm (W) x 111.2 mm (H)|
|EMC||CE Class A, per EN 55022/55024; FCC Class A, per FCC Part 15, Subpart B|
|EMS||IEC 61000-4-x Class/ Level 3|
|Operating Temperature:||0°C - 60°C with air flow|
|Conformance||IEEE 802.3at-2009, FCC Class A, CE Class A|