The Basler Racer 2 S r2L2048-58gm GigE Vision camera, built on the Gpixel GMAX3504 sensor, offers great value. Equipped with Front II (see drawing)
Basler racer 2 S line scan cameras are a great choice for factory automation and inspection installations. The Basler Racer 2 S cameras have a compact, slim industrial housing with a foot print of only 29 x 29 mm. Both the 2k and 4k models have a CMOS image sensor that is compatible with C-mount lenses, helping to minimize system cost. This camera's GigE interface supports Power-over-Ethernet (PoE) for simplified cabling.
Electrical
| Power: | Power-over-Ethernet (PoE per IEEE 802.3af) or 12 to 24 VDC |
| I/O: | 1 opto-coupled input, 2 general purpose I/O |
| Ingress Protection: | IP30 |
Mechanical
| Lens Mount: | C-Mount |
| Weight: | 100 g |
Environmental
| Operating Temperature: | -10 °C to 50 °C |
| Humidity (storage & operation): | 20 to 80%, relative, non-condensing |
Miscellaneous
| Sensor Resolution: | 2,048 (h) x 4 (v) pixels |
| Sensor Size: | 14.34 mm |
| Sensor Model: | Gpixel GL3504-BVC-NCN-AU1 |
| Chroma: | Monochrome |
| Shutter Type: | Global |
| Frame Rate (full resolution): | 58,000.0 frames/second |
| Data Interface: | Ethernet Gig-E Vision |
| Data Rate: | Gigabit Ethernet |
| Conformance: | CE (including RoHS), EAC, FCC, GenICam, GigE Vision 2.0, KC, UKCA, UL |
| Synchronization: | Hardware trigger, software trigger, or free run |
Connectors
| Data Connector: | RJ-45 |
| I/O/P Connector: | M8 6-pin female, A-coded |
Learn about camera specs in our Camera Tech Center.
This camera is warranted by the manufacturer to be free from defects in materials and workmanship under normal use for a period of three (3) years from the date of original factory manufacture.
Small quantities of cameras normally stocked by Machine Vision Store may be returned within 30 days, subject to a 20% restocking charge, if original package is unopened and in new condition. Larger quantities are subject to Basler's 40% restocking charge. Open packages may not be returned.
All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions. The item's serial number and associated sales order number will be needed.
