The SVS-Vistek hr65MXGE camera is built on the Gpixel GMAX3265 monochrome sensor. Having a 10GigE interface, it delivers the 65 MP image at 17.4 frames per second.
YOUR CHOICE OF SENSOR GRADE
This camera is available in two sensor grades. Choose Grade 1 for installations where image quality is paramount. Choose Grade 2 when cost is key and a larger number of out-of-spec pixels can be tolerated.
10 GigE INTERFACE
The 10 GigE Vision interface delivers up to 1.1 GB/s of image data, over long cable runs. This camera is GigE Vision and GenIcam standard compliant, with a GenTL driver. Burst mode is enabled by temporary on-camera image buffering.
IMAGING FEATURES
This 10 GigE camera's features include: ROI, LUT, binning, offset, auto-exposure, defect pixel correction and, on color cameras, manual and automatic white balance.
FLEXIBLE LENS MOUNT
This camera has a M58 lens mount, enabling you to pair it with the optimal lens for your project. We offer adapters for M42, F, and EF-mount lenses. And be sure to check our selection of quality lenses for large format sensors.
FLEXIBLE I/O
This camera's flexible electrical interface includes 3 inputs and 4 outputs, plus support for RS232 communication with a lens or light controller. Features include programmable IO logic, a sequencer, timer, SafeTrigger and an integrated 4-channel LED strobe controller. The light controllers can be adjusted via the GenICam parameter tree. GenICam compliant software, or the SDK API, can therefore adjust the light settings for a seamlessly integrated solution.
Loading...
Electrical
| Inputs: | 3 total, 24 VDC, one optically isolated |
| Outputs: | 4 total, 24 VDC, with support for PWM (up to 3 amps for 40 ms, or 0.3 amps continuously) |
| Input Voltage: | 10 - 25 VDC |
| PoE: | Power over Ethernet is available as an option |
| RS-232 Interface: | Yes (RXD, TXD) |
Mechanical
| Lens Mount: | M58x0.75 |
| Camera Flange-back Distance: | 11.48 mm |
Environmental
| Ambient Temperature: | -10 to 45 °C |
| Ambient Humidity: | 10 to 90% (non-condensing) |
| Ingress Protection: | IP30 |
Miscellaneous
| Sensor Resolution: | 9,344 (h) x 7,000 (v) pixels |
| Sensor Size: | 37.36 mm |
| Sensor Model: | Gpixel GMAX3265-BVM |
| Chroma: | Monochrome |
| Shutter Type: | Global |
| Frame Rate (full resolution): | 17.4 frames/second |
| Dynamic Range: | 65.6 dB |
| Signal-to-Noise Ratio: | 40.0 dB |
| Test Method: | Manufacturer Specifications |
| Data Interface: | Ethernet Gig-E Vision |
| Data Rate: | 10 Gigabit Ethernet |
| Pixel Format: | bayer8, bayer12, bayer16 / 16 bit |
Connectors
| I/O Connector: | Hirose 12-pin male (HR10A-10R-12P) |
| Data Connector: | RJ45 port (GigE Vision TYPE090) |
Camera performance depends in part on the environment.
Learn about camera specs in our Camera Tech Center.
Quick I/O Guide
Manual
Optimizing NIC settings
Select a Lens for SVS-Vistek hr65MXGE
Learn from our Camera Tech Center
Sign In or Register to unlock all links above.
The manufacturer will repair or replace defective cameras within two years of factory shipment. For further information, please refer to the manufacturer's website.
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)
