Image shows a SVS-Vistek fxo990MCX

CASK3051

SVS-Vistek fxo990MCX

1280 x 1024 SWIR CoaXPress Camera

Not available for purchase outside of United States.
Please contact us for a quote.
Image visible, NIR, and SWIR light
CXP-12 interface for 134 FPS
Integrated strobe controller

The SVS-Vistek fxo990MCX camera offers 1.3 MP resolution, a CoaXPress interface for 134 frames per second, and the ability to solve unique imaging problems. It is built on the Sony IMX990 image sensor. With support for PoCXP, the single-cable CXP-12 interface can be used to power the camera.

SWIR (short-wave infrared) cameras can reveal features that are otherwise invisible. See flaws, contaminants, and moisture in a variety of materials. Imaging in NIR or SWIR can often see through features you wish to ignore, such as pigments, fog, and some plastics. SWIR can also be used to differentiate between some chemicals based on their different absorption spectra. For example, at 1450 nm, a bottle of water is opaque but a bottle of mineral oil is transparent.

Using SenSWIR technology from Sony, this camera produces a homogeneous image across wavelengths ranging from 400 to 1700 nm. This can enable innovative solutions that combine images captured in the visible, NIR, and SWIR ranges. Use the camera's integrated 4-channel strobe controller to power one of our multi-channel SWIR LED lights.

Loading...

Electrical

Power: Power-over-CoaXPress (PoCXP), or 7 W at 10 - 25 VDC
Inputs: 3 total, 24 VDC, one optically isolated
Outputs: 4 total, 24 VDC, with support for PWM (up to 3 amps for 40 ms, or 0.3 amps continuously)
RS232 Interface: Additional input for RXD and output for TXD

Mechanical

Lens Mount: C-Mount

Miscellaneous

Sensor Resolution: 1,280 (h) x 1,024 (v) pixels
Sensor Size: 8.28 mm
Sensor Model: Sony IMX990
Chroma: Monochrome
Shutter Type: Global
Frame Rate (full resolution): 134.0 frames/second
Dynamic Range: 57.0 dB
Data Interface: CoaXPress
Data Rate: CXP-12 x1 cable

Connectors

Data Connector: 75 ohm HD-BNC (micro BNC), male, qty 1
I/O Connector: Hirose male HR10A-10R-12P

Learn about camera specs in our Camera Tech Center.

The manufacturer will repair or replace defective cameras within two years of factory shipment. For further information, please refer to the manufacturer's website.

We're interested in making sure you're happy with your purchase. Some models are available for a 30-day evaluation. The return of cameras is subject to factory discretion. Any cameras approved for return must be in new condition and in their original packaging. Returns will be subject to a restocking fee.

All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions. The item's serial number and associated sales order number will be needed.