The Leimac IDDA-KH350RHV red LED dome light is 2353 mm in diameter, with a bottom aperture of 300 mm.
LED dome lights are the best solution for minimizing reflections on glossy objects with undulating surfaces. Examples of such objects include glossy plastic films, machined metal parts, and cast metal parts.
For best results, the dome should be mounted as near to the object as possible. The opening at the bottom of the dome must, at a minimum, be larger than the field of view. Larger domes will project light at a lower angle onto the object. This allows for greater variations in the object's surface without producing bright reflections.
The camera view port at the top of the dome may be visible as a shadow on highly-reflective surfaces. (To avoid this, we also offer dome lights having an integrated coaxial light at the view port.)
Note that the product photo above may show a different size of light. Please refer to the drawing for dimensions.
|Input Voltage:||12 VDC and 24 VDC models available in most sizes|
|Window Size:||300 x 300 mm (11.8" x 11.8")|
|Operating Temperature:||0 - 40 °C|
|Operating Humidity:||35 - 85%, non-condensing|
|Wavelength:||635 nm typical (Red)|
|Cable Length:||0.5 m (1.6 ft)|
|Cable Connector:||SMR-02V-B (12V) or SMR-03V-B (24V)|
|Conformance||RoHS, China RoHS, CE (IEC62471)|
See Resources section below to download drawings.
Leimac, Ltd. warranties lights against failure for 2 years from date of factory shipment, and against a 50% or greater decrease from the specified intensity for 1 year from date of factory shipment. Warranty shall not apply if failure is due to connecting the light to equipment or a power supply made by a third-party, or other factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)