The SVS-Vistek hr455MXGE camera is built on the Sony IMX455 monochrome sensor. Having a 10GigE interface, it delivers the 61 MP image at 17.9 frames per second.
10 GigE INTERFACE
The 10 GigE Vision interface delivers up to 1.1 GB/s of image data, over long cable runs. This camera is GigE Vision and GenIcam standard compliant, with a GenTL driver. Burst mode is enabled by temporary on-camera image buffering.
This 10 GigE camera's features include: ROI, LUT, binning, offset, auto-exposure, defect pixel correction and, on color cameras, manual and automatic white balance.
FLEXIBLE LENS MOUNT
This camera has a M58 lens mount, enabling you to pair it with the optimal lens for your project. We offer adapters for M42, F, and EF-mount lenses. And be sure to check our selection of quality lenses for large format sensors.
This camera's flexible electrical interface includes 3 inputs and 4 outputs, plus support for RS232 communication with a lens or light controller. Features include programmable IO logic, a sequencer, timer, SafeTrigger and an integrated 4-channel LED strobe controller. The light controllers can be adjusted via the GenICam parameter tree. GenICam compliant software, or the SDK API, can therefore adjust the light settings for a seamlessly integrated solution.
|Inputs:||3 total, 24 VDC, one optically isolated|
|Outputs:||4 total, 24 VDC, with support for PWM (up to 3 amps for 40 ms, or 0.3 amps continuously)|
|Input Voltage:||10 - 25 VDC|
|PoE:||Power over Ethernet is available as an option|
|RS-232 Interface:||Yes (RXD, TXD)|
|Camera Flange-back Distance:||11.48 mm|
|Ambient Temperature:||-10 to 45 °C|
|Ambient Humidity:||10 to 90% (non-condensing)|
|Sensor Resolution:||9,568 (h) x 6,380 (v) pixels|
|Sensor Size:||43.24 mm|
|Sensor Model:||Sony IMX455LLA|
|Frame Rate (full resolution):||17.9 frames/second|
|Data Interface:||Ethernet Gig-E Vision|
|Data Rate:||10 Gigabit Ethernet|
|I/O Connector:||Hirose 12-pin male (HR10A-10R-12P)|
|Data Connector:||RJ45 port|
Learn about camera specs in our Camera Tech Center.
Sign In or Register to unlock all links above.
The manufacturer will repair or replace defective cameras within two years of factory shipment. For further information, please refer to the manufacturer's website.
We're interested in making sure you're happy with your purchase. Some models are available for a 30-day evaluation. The return of cameras is subject to factory discretion. Any cameras approved for return must be in new condition and in their original packaging. Returns will be subject to a restocking fee.
All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions. The item's serial number and associated sales order number will be needed.