The Basler racer line scan cameras offer an exceptional price/performance ratio. This camera delivers high performance thanks to the CMOS sensor technology. Racer cameras have a compact, slim industrial housing ideally suited for multi-camera systems with many line scan cameras installed next to each other. Based on their standard width of 56 mm, they can easily replace older line scan camera models.
This camera has two "mini" (SDR/HDR) Camera Link connectors. Base, Medium and Full configurations are supported. The camera also supports Power over Camera Link so that an additional power cable is not needed. Or, a 6-pin power connector can be used instead. The Camera Link interface includes four configurable camera inputs and one configurable camera output. Because this camera is Camera Link compliant, there are many third party frame grabbers and software applications that are compatible.
Each camera is fully tested and calibrated for consistently high performance and reliability.
The price shown above EXCLUDES the lens mount. Options include F, M42x1, and M42x0.75 mounts. Please see the Accessories section below.
|Power - PoCL:
|Either Power-over-Camera Link (PoCL) is supported by 2K and 4K models only
|Power - Aux:
|All models may be powered via 12 - 24 VDC applied to 6-pin auxiliary connector
|Flange Back Distance:
|9.0 mm (excluding optional lens mount)
|4,096 (h) x 1 (v) pixels
|28.67 mm (1.75")
|Awaiba Dragster DR-4k-7
|Frame Rate (full resolution):
|Camera Link Full
|Camera Link Connectors:
|2 x "mini" SDR/HDR
|6-pin Male Hirose HR10A-7R-6PB
Learn about camera specs in our Camera Tech Center.
See Resources section below to download drawings.
This camera is warranted by the manufacturer to be free from defects in materials and workmanship under normal use for a period of three (3) years from the date of original factory manufacture. For further information, please refer to the manufacturer's website.
Small quantities of cameras normally stocked by Machine Vision Store may be returned within 30 days, subject to a 20% restocking charge, if original package is unopened and in new condition. Larger quantities are subject to Basler's 40% restocking charge. Open packages may not be returned.
All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions. The item's serial number and associated sales order number will be needed.