The Basler a2A640-240umSWIR camera enables innovative imaging solutions. Capture images across the full spectrum of visible to short-wave infrared.
This short-wave infrared camera with standard USB3 Vision interface offers several features important for challenging installations.
> Sequencers enable the rapid capture of multiple frames using different parameter settings. For example, capturing a couple images using different exposure durations enables construction of HDR images.
> Bloom reduction parameter minimizes photons spilling over into adjacent pixels.
Due to dual-use export controls applying to this item, purchase requires written information on the intended use and final destination.
Loading...
Electrical
| Input Line: | 1 opto-coupled input line; 30 VDC absolute max. |
| General Purpose Lines: | 2 general purpose I/O. 30 VDC absolute max. 50 mA maximum load when configured as output. |
Mechanical
| Lens Mount: | C-Mount |
Environmental
| Operating Housing Temperature: | -10–50 °C (14–122 °F) |
| Operating Humidity: | 20–80 %, relative, non-condensing |
| Storage Temperature: | -20–80 °C (-4–176 °F) |
| Storage Humidity: | 20–80 %, relative, non-condensing |
| Housing Temperature Limit: | max. 70 °C (158 °F) per UL 62368-1 |
| Ambient Temperature Limit: | max. 30 °C (86 °F) per UL 62368-1 |
Miscellaneous
| Sensor Resolution: | 640 (h) x 512 (v) pixels |
| Sensor Size: | 4.19 mm |
| Sensor Model: | Sony IMX991 |
| Chroma: | Monochrome |
| Shutter Type: | Global |
| Frame Rate (full resolution): | 240.0 frames/second |
| Data Interface: | USB3 Vision |
| Data Rate: | USB 3.0 Only (5 Gbps) |
| Spectral Response: | 400 to 1650 nm above 70% relative quantum efficiency |
Connectors
| Data Connector: | USB 3.0 Micro-B connector with screw lock |
| I/O Connector: | M8 6-pin male, A-coded, per IEC 61076-2-104 |
Standards
| Conformance | CE, EAC, GenICam, IP30, KC, RoHS, UL, USB3 Vision |
Learn about camera specs in our Camera Tech Center.
Loading...
This camera is warranted by the manufacturer to be free from defects in materials and workmanship under normal use for a period of three (3) years from the date of original factory manufacture.
Please contact us for information regarding whether orders for this item can be cancelled or returned.
