Machine Vision Store

The exo387MGETR "Tracer" blends a Sony IMX387 monochrome sensor with the Micro-Four-Thirds lens standard. The result is a flexible imaging solution that delivers excellent image quality. The user has full control of lens zoom, focus and aperture through GenICam parameters, making for a seamless solution easily integrated with existing software.

The MFT lens system was pioneered by increasing demands in digital still photography. This standard, based on a bayonet mount, is widely used for compact cameras and is 100% optimized for digital image capture. There is a wide selection of suitable lenses, making new and previously unthinkable solutions reality.

In addition, the "Tracer" features:

> Micro-Four-Thirds lens adapter

> Fast user control of zoom, aperture and focus

> Lens settings controlled by GigE Vision Ethernet interface

> GigE Vision and GenIcam compatible

> Free SDK for Windows (32/64bit) and Linux

EXO CAMERAS

SVS-Vistek calls their EXO series cameras “the integrator’s camera,” and they do so with good reason. Most EXO cameras are built on Sony IMX Pregius sensors offering excellent dynamic range and efficiency with a high signal-to-noise ratio. These cameras deliver all the imaging control you would expect, plus a surprising amount of I/O functionality.

Being GigE Vision and Genicam compliant, most machine vision software platforms can easily communicate with EXO cameras. And, for those that prefer to develop a custom application, there is a free SDK.

All EXO GigE Vision cameras can be powered via either Power-over-Ethernet ("PoE") or an external 12 - 24 VDC supply.

MACHINED ALUMINUM HOUSING

The EXO series cameras have a precision-machined 50 x 50 mm IP40 aluminum body. The unibody housing ensures excellent temperature distribution, enabling today’s image sensors to run cooler. The rigid lens mount keeps lenses properly positioned to maintain sharp focus. There are mounting holes on five faces of the housing, plus a standard 1/4-20 tap on the bottom for attaching a tripod.

The housing includes a multi-color flashing LED that indicates camera status.

POWERFUL I/O FUNCTIONALITY

This GigE Vision Ethernet camera has two trigger inputs plus an optically-isolated input. There are four outputs. There is also an RS232 input (RXD) and output (TXD). Inputs use Schmitt triggers for better noise immunity. Both inputs and outputs support discrete 24 VDC.

The camera’s inputs offer unusual functionality. They can be configured to debounce inputs, control timing of camera operations and output signals, and control four independent pulse (PWM) generators. Timing functions can be programmed with a resolution of 15 ns. A pulse divider lets you take an action on every nth signal, where n is a value between 1 and 15. Logic gates (AND, NAND, OR, NOR) combine signals to make decisions.

BUILT-IN LIGHT CONTROL

A built-in LED driver enables control of external lights. The driver delivers up to 3 amps for 40 ms, or 0.3 amps continuously. High-frequency PWM functionality enables the camera to control light intensity. Most EXO models support up to four independent lights.