Image shows a Leimac IDBA-CH75S-UV


Leimac IDBA-CH75S-UV

Bar Light, 77 x 25 mm, UV

77 x 25 mm UV LED bar light
Ultraviolet light
Powered by 24 VDC

This 77 mm UV LED bar light is typically used for direct illumination from the front, although it can also be used as a long, narrow back-light.

The Leimac IDBA-CH ultraviolet LED bar lights are used to create contrast where little to none exists under visible light. Compared with halogen light sources, these LEDs are compact, efficient, stable, and run cool. Pair with a PWM controller (sold separately) for precise intensity control.

UV light is often combined with visible light cameras to image fluorescing materials. UV lights are also used with UV cameras in order to better detect fine surface scratches. Ask us about an appropriate bandpass filter to further enhance contrast.

The IDBA-CH lights are available in 365, 375, 385, 395 and 405 nm models. You can choose either a narrow or wide projection angle.

Take precautions when working around ultraviolet lights. Do not look directly into the light, or light reflected from mirror-like surfaces. Wear UV-blocking protective goggles. Do not apply power to the light while it is pointed into someone's eyes. Wear a long-sleeve shirt and gloves to protect skin from UV illumination.

The image above is representative of general construction, but may show a different light size.



Power: 7.5 W
Voltage: 24 VDC


Window: Clear
Window Size: 77 x 25 mm (3.0" x 1.0")


Operating Temperature: 0 - 40℃
Operating Humidity: 35 - 85% (non-condensing)


Type: Linear Array
Wavelength: 365 nm typical (Ultraviolet)


Cable Length: 0.5 m (1.6 ft)
Connector: Omron SMR-03V-B
Connector Polarity: 1+, 2 NC, 3-


Conformance RoHS, China RoHS, CE IEC62471

Choose a projection angle

N Narrow angle
W Wide angle

Choose a wavelength

365 365 nm
375 375 nm
385 385 nm
395 395 nm
405 405 nm

Not available for purchase outside of North America.

Please sign in to check inventory.


See Resources section below to download drawings.

Disabled resource link Manual
Disabled resource link Drawing (DXF)
Disabled resource link Drawing (STEP)
Solve My Lighting Free Solve My Lighting Service

Sign In or Register to unlock all links above.

Leimac, Ltd. warranties lights against failure for 2 years from date of factory shipment, and against a 50% or greater decrease from the specified intensity for 1 year from date of factory shipment. Warranty shall not apply if failure is due to connecting the light to equipment or a power supply made by a third-party, or other factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.

Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)