The SVS-Vistek fxo542MCX camera offers 16 MP resolution, a CoaXPress interface for 45.6 frames per second. With support for PoCXP, the single-cable CXP-12 interface can be used to power the camera.
The CoaXPress interface delivers high-bandwidth over long cable runs. Power over CoaXPress is supported for simplified installation.
This CoaXPress camera's features include: ROI, LUT, binning, offset, flat-field correction, shading correction, defect pixel correction, SafeTrigger, and programmable I/O logic with sequencer and timers.
FXO color cameras also feature Color Transformation Control. This capability takes the camera beyond a crude white balance, instead performing a matrix calculation for each pixel to deliver improved color representation.
This camera's flexible electrical interface includes 3 inputs and 4 outputs, plus support for RS232 communication with a lens or light controller. Features include programmable IO logic, a sequencer, timer, SafeTrigger and an integrated 4-channel LED strobe controller. The strobe controller can be adjusted via the GenICam parameter tree. GenICam compliant software, or the SDK API, can therefore adjust the light settings for a seamlessly integrated solution.
|Power Voltage:||10 to 25 VDC (or PoCXP)|
|Operating Temperature:||-10 to 60 °C|
|Ambient Humidity:||10 to 90 % (non-condensing)|
|Sensor Resolution:||5,320 (h) x 3,032 (v) pixels|
|Sensor Size:||16.78 mm|
|Sensor Model:||Sony IMX542-AAMJ|
|Frame Rate (full resolution):||45.6 frames/second|
|Dynamic Range:||72.0 dB|
|Signal-to-Noise Ratio:||39.9 dB|
|Data Rate:||CXP-12 x1 cable|
|Data Connector:||75 ohm HD-BNC (micro BNC), male, qty 1|
|I/O Connector:||Hirose male HR10A-10R-12P|
Learn about camera specs in our Camera Tech Center.