The SVS-Vistek fxo547MXGE camera offers 5 MP resolution, a 10GigE interface for 124 frames per second. With support for PoE, the 10GigE interface can be used to power the camera.
10 GigE INTERFACE
The SVS-Vistek 10 GigE interface delivers up to 1.1 GB/s of image data over cables runs up to 100 meters long. This camera is GigE Vision and GenICam 3.0 standard compliant, with a GenTL driver, and is therefore compatible with most third-party vision platforms. Burst mode is enabled by temporary on-camera image buffering.
This SVS-Vistek camera can be powered via either Power-over-Ethernet ("PoE") or an external 12 - 24 VDC supply.
This 10 GigE camera's features include: ROI, LUT, binning, offset, auto-exposure, defect pixel correction and, on color cameras, manual and automatic white balance.
FXO color cameras also feature Color Transformation Control. This capability takes the camera beyond a crude white balance, instead performing a matrix calculation for each pixel to deliver improved color representation.
This camera's flexible electrical interface includes 3 inputs and 4 outputs, plus support for RS232 communication with a lens or light controller. Features include programmable IO logic, a sequencer, timer, SafeTrigger and an integrated 4-channel PWM LED light controller. The light controller can be adjusted via the GenICam parameter tree. GenICam compliant software, or the SDK API, can therefore adjust the light settings for a seamlessly integrated solution.
|Sensor Resolution:||2,448 (h) x 2,048 (v) pixels|
|Sensor Size:||8.75 mm|
|Sensor Model:||Sony IMX547-AAMJ|
|Frame Rate (full resolution):||124.0 frames/second|
|Dynamic Range:||72.0 dB|
|Signal-to-Noise Ratio:||39.0 dB|
|Data Interface:||Ethernet Gig-E Vision|
|Data Rate:||10 Gigabit Ethernet|
|I/O Connector:||Hirose male HR10A-10R-12P|
Learn about camera specs in our Camera Tech Center.