The SVS-Vistek fxo547MCX camera offers 5 MP resolution with a CoaXPress interface to deliver 124 frames per second. The camera supports PoCXP, so the single-cable CXP-12 interface can be used to power the camera.
This camera is built on the Sony IMX547 sensor. SVS-Vistek has done the extra work to support this sensor's capability for short intervals between exposures. With an approximate interframe time of just 2 µs, image brightness is maximized even while operating at the full frame rate.
The CoaXPress interface delivers high-bandwidth over long cable runs. Power over CoaXPress is supported for simplified installation.
This CoaXPress camera's features include: ROI, LUT, binning, offset, flat-field correction, shading correction, defect pixel correction, SafeTrigger, and programmable I/O logic with sequencer and timers.
FXO color cameras also feature Color Transformation Control. This capability takes the camera beyond a crude white balance, instead performing a matrix calculation for each pixel to deliver improved color representation.
This camera's flexible electrical interface includes 3 inputs and 4 outputs, plus support for RS232 communication with a lens or light controller. Features include programmable IO logic, a sequencer, timer, SafeTrigger and an integrated 4-channel LED strobe controller. The strobe controller can be adjusted via the GenICam parameter tree. GenICam compliant software, or the SDK API, can therefore adjust the light settings for a seamlessly integrated solution.
|Power Voltage:||10 to 25 VDC (or PoCXP)|
|Power:||8 W (depending on operating mode)|
|Internal Memory:||1024 MB SDRAM, 256 MB Flash|
|Operating Temperature:||-10 to 60 °C|
|Ambient Humidity:||10 to 90 % (non-condensing)|
|Sensor Resolution:||2,448 (h) x 2,048 (v) pixels|
|Sensor Size:||8.75 mm|
|Sensor Model:||Sony IMX547-AAMJ|
|Frame Rate (full resolution):||124.0 frames/second|
|Dynamic Range:||72.0 dB|
|Signal-to-Noise Ratio:||39.0 dB|
|Data Rate:||CXP-12 x1 cable|
|Exposure Time:||19 µs to 1.0 sec.|
|Data Connector:||75 ohm HD-BNC (micro BNC), male, qty 1|
|I/O Connector:||Hirose male HR10A-10R-12P|
Learn about camera specs in our Camera Tech Center.
We're interested in making sure you're happy with your purchase. Some models are available for a 30-day evaluation. The return of cameras is subject to factory discretion. Any cameras approved for return must be in new condition and in their original packaging. Returns will be subject to a restocking fee.
All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions. The item's serial number and associated sales order number will be needed.