Built on the Sony Polarsens IMX250MZR sensor, the exo250ZGE camera detects the polarization of light. A four-directional polarization filter using nano-wires is overlaid directly on top of the pixel array and beneath the micro lenses. This filter consists of repeated 2 x 2 patterns of grid polarizers with four different angles: 0, 45, 135 and 90 degrees. Each polarizer filters the incoming light so that only the polarization components perpendicular to the grid orientation can pass through and be detected by the underlying photo-diode. A four-direction polarization image can be captured in a single shot.
SVS-Vistek calls their EXO series cameras “the integrator’s camera,” and they do so with good reason. Most EXO cameras are built on Sony IMX Pregius sensors offering excellent dynamic range and efficiency with a high signal-to-noise ratio. These cameras deliver all the imaging control you would expect, plus a surprising amount of I/O functionality.
Being GigE Vision and Genicam compliant, most machine vision software platforms can easily communicate with EXO cameras. And, for those that prefer to develop a custom application, there is a free SDK.
All EXO GigE Vision cameras can be powered via either Power-over-Ethernet ("PoE") or an external 12 - 24 VDC supply.
MACHINED ALUMINUM HOUSING
The EXO series cameras have a precision-machined 50 x 50 mm IP40 aluminum body. The unibody housing ensures excellent temperature distribution, enabling today’s image sensors to run cooler. The rigid lens mount keeps lenses properly positioned to maintain sharp focus. There are mounting holes on five faces of the housing, plus a standard 1/4-20 tap on the bottom for attaching a tripod.
The housing includes a multi-color flashing LED that indicates camera status.
POWERFUL I/O FUNCTIONALITY
This GigE Vision Ethernet camera has two trigger inputs plus an optically-isolated input. There are four outputs. There is also an RS232 input (RXD) and output (TXD). Inputs use Schmitt triggers for better noise immunity. Both inputs and outputs support discrete 24 VDC.
The camera’s inputs offer unusual functionality. They can be configured to debounce inputs, control timing of camera operations and output signals, and control four independent pulse (PWM) generators. Timing functions can be programmed with a resolution of 15 ns. A pulse divider lets you take an action on every nth signal, where n is a value between 1 and 15. Logic gates (AND, NAND, OR, NOR) combine signals to make decisions.
BUILT-IN LIGHT CONTROL
A built-in LED driver enables control of external lights. The driver delivers up to 3 amps for 40 ms, or 0.3 amps continuously. High-frequency PWM functionality enables the camera to control light intensity. Most EXO models support up to four independent lights.
|Input Power:||Power-over-Ethernet, or 10 to 25 VDC|
|Inputs:||3 total, 24 VDC, one optically isolated|
|Outputs:||4 total, 24 VDC, with support for PWM (up to 3 amps for 40 ms, or 0.3 amps continuously)|
|RS232 Interface:||Additional input for RXD and output for TXD|
|Dimensions:||50 x 50 x 43 mm|
|Operating Temperature:||-10 to 60 °C (housing)|
|Operating Humidity:||10 to 90 % (non-condensing)|
|Sensor Resolution:||2,448 (h) x 2,049 (v) pixels|
|Sensor Size:||11.01 mm (2/3")|
|Sensor Model:||Sony IMX250MZR|
|Frame Rate (full resolution):||24.5 frames/second|
|Dynamic Range:||72.0 dB|
|Signal-to-Noise Ratio:||40.0 dB|
|Data Interface:||Ethernet Gig-E Vision|
|Data Rate:||Gigabit Ethernet|
|I/O Connector:||Hirose 12-pin male (HR10A-10R-12P)|
|Data Connector:||RJ45 Socket|
Learn about camera specs in our Camera Tech Center.
The manufacturer will repair or replace defective cameras within two years of factory shipment. For further information, please refer to the manufacturer's website.
Return of cameras in new condition are subject to a restocking charge. Please contact us for details.
All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions. The item's serial number and associated sales order number will be needed.