This 61 megapixel SVS-Vistek monochrome camera is built on the Sony IMX455 sensor. This high-performance sensor has 3.76 µm pixels and a rolling shutter for maximum efficiency. The quad CoaXPress CXP-6 interface delivers 17.9 frames-second-second. Cables runs up to 200 meters are possible, although at lower frame rates.
The CoaXPress interface delivers high-bandwidth over long cable runs. Quad CoaXPress-6 offers up to 4 x 6.25 Gbits/second, for a total bandwidth of 25 Gbits/second. Power over CoaXPress is supported for simplified installation.
This CoaXPress camera's features include: ROI, LUT, binning, offset, flat-field correction, shading correction, defect pixel correction, SafeTrigger, and programmable I/O logic with sequencer and timers.
FLEXIBLE LENS MOUNT
This camera has a M58 lens mount, enabling you to pair it with the optimal lens for your project. We offer adapters for M42, F, and EF-mount lenses. And be sure to check our selection of quality lenses for large format sensors.
This camera's flexible electrical interface includes 3 inputs and 4 outputs, plus support for RS232 communication with a lens or light controller. Features include programmable IO logic, a sequencer, timer, SafeTrigger and an integrated 4-channel LED strobe controller. The strobe controller can be adjusted via the GenICam parameter tree. GenICam compliant software, or the SDK API, can therefore adjust the light settings for a seamlessly integrated solution.
|Inputs:||3 total, 24 VDC, one optically isolated|
|Outputs:||4 total, 24 VDC, with support for PWM (up to 3 amps for 40 ms, or 0.3 amps continuously)|
|Input Voltage:||10 - 25 VDC, or Power over CXP|
|Input Current:||14 W (depending on operating mode)|
|Camera Flange-back Distance:||11.48 mm|
|Ambient Temperature:||-10 to 45 °C|
|Ambient Humidity:||10 to 90% (non-condensing)|
|Sensor Resolution:||9,568 (h) x 6,380 (v) pixels|
|Sensor Size:||43.24 mm|
|Sensor Model:||Sony IMX455LLA|
|Frame Rate (full resolution):||17.9 frames/second|
|Data Rate:||CXP-6 x4 cables|
|I/O Connector:||Hirose 12-pin male (HR10A-10R-12P)|
|Data Connector:||75Ω DIN 1.0/2.3 female connector|
Learn about camera specs in our Camera Tech Center.
The manufacturer will repair or replace defective cameras within two years of factory shipment. For further information, please refer to the manufacturer's website.
We're interested in making sure you're happy with your purchase. Several models are available for 30-day evaluation. Return of cameras in new condition and in their original packaging are subject to a restocking charge. We cannot accept the return of used cameras. Please contact us for details.
All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions. The item's serial number and associated sales order number will be needed.