This 1,100 mm blue LED bar light is typically used for direct illumination from the front, although it can also be used as a long, narrow back-light.
The Leimac IDBA-HM LED bar lights project light at about a 140 degree angle with high uniformity. They are a good choice for illuminating wide areas. Lights are available in lengths ranging from 100 to 2000 mm, in 100 mm increments, with your choice of white, blue or red LEDs.
For easy mounting, there are slots for hexagon nuts on the back (M5) and sides (M3) .
These bar lights are available in two configurations. One delivers maximum intensity for direct illumination. The other provides greater uniformity, recommended when back-lighting objects. All models are powered by 24 VDC. We recommend combining them with a Leimac intensity controller and power cable, which are sold separately.
(Note that the product image above may show a different size of light. Please refer to the drawing for dimensions.)
Loading...
Power: | 110 W |
Input Voltage: | 24 VDC |
Window: | Standard Diffuser |
Window Size: | 1,100 x 40 mm (43.3" x 1.6") |
Operating Temperature: | 0 - 40 °C |
Operating Humidity: | 35 - 85%, non-condensing |
Type: | Linear Array |
Wavelength: | 465 nm typical (Blue) |
Cable Length: | 0.5 m (1.6 ft) |
Conformance | RoHS, China RoHS, CE IEC62471 |
Loading...
See Resources section below to download drawings.
Sign In or Register to unlock all links above.
Leimac, Ltd. warranties lights against failure for 2 years from date of factory shipment, and against a 50% or greater decrease from the specified intensity for 1 year from date of factory shipment. Warranty shall not apply if failure is due to connecting the light to equipment or a power supply made by a third-party, or other factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)