The Leimac IWDV-300S-24 light controller is recommended for use with large flat panel lights, as well as line lights. It can deliver 300 watts to its single output channel via multiple connectors.
This LED light controller enables light intensity to be adjusted via Ethernet, 10-bit parallel inputs, or the adjustment knob. There is a control input to enable/disable output power, and a control output to indicate fault.
This controller is compatible with 24 volt LED lights that are controlled by voltage. Multiple lights may be connected so long as their total power draw does not exceed the rated value.
The product photo above is generally representative of the product family. Please refer to the drawing for detailed information on this specific model.
|Control Interfaces:||Manual, Ethernet TCP/IP, Parallel|
|Control Method:||Voltage Control|
|Total Output Power:||300W max. (all lights combined)|
|Output Voltage Ranges:||7 to 24V, 13 to 24V, 15.5 to 24V|
|Voltage Control Response:||7 to 24V in 60 ms or less; 24 to 7V in 650 ms or less|
|External On/Off Response:||Off to On in 20 ms or less; On to Off in 650 ms or less|
|Voltage Control Resolution:||1000 levels (10-bit)|
|Input Power:||100 to 240 VAC nominal (85 to 264 VAC permitted), 410 VA typical, 50/60 Hz|
|Over-voltage Category:||Category II|
|Fault Detection:||Output over-current, Output over-voltage, cooling fan stopped, abnormal temperature|
|Electrical Inputs:||10 inputs, 5 - 24 VDC, for selecting intensity; 1 input for light enable/disable|
|Electrical Outputs:||1, 5 - 24 VDC, to indicate fault|
|Ethernet:||TCP/IP, IEEE802.3 (10BASE-T) and IEEE802.3u (100BASE-TX)|
|Operating Temperature:||0°C to +40ºC|
|Operating Humidity:||20 to 70%RH up to 31°C; 20 to 50% RH up to 40°C; no condensation|
|Storage Temperature:||-20°C to +65ºC|
|Storage Humidity:||20 to 85% RH|
|Altitude:||Under 2000 m|
|Power Connector:||IEC 60320 C14 "PC type" receptacle|
|High-Power Outputs:||2x NJC-204-RF (300W max.)|
|Low-Power Outputs:||4x SMP-03V-BC (72W max. each)|
|Conformance||RoHS, China RoHS, PSE, CE (EN61010-1, EN55011, EN61000-6-2)|
See Resources section below to download drawings.
Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)