Image shows a Leimac IWDV-100S-24

LTLC9220

Leimac IWDV-100S-24

Light Controller, 1 Channel, 100 W

Not available for purchase outside of US & Canada.
Please contact us for a quote.
100 watt supply
1-channel, multiple lights
Ethernet and parallel control interfaces
100 - 240 VAC input voltage

The Leimac IWDV-100S-24 light controller is recommended for use with flat panel lights and line lights. It can deliver 100 watts via its single output channel to multiple connectors.

This LED light controller enables light intensity to be adjusted via Ethernet, 10-bit parallel inputs, or the adjustment knob. There is a control input to enable/disable output power, and a control output to indicate fault.

This controller is compatible with 24 volt LED lights that are controlled by voltage. Multiple lights may be connected so long as their total power draw does not exceed the rated value.

The product photo above is generally representative of the product family. Please refer to the drawing for detailed information on this specific model.

Loading...

Electrical

Output Channels: 1
Control Interfaces: Manual, Ethernet TCP/IP, Parallel
Control Method: Voltage Control
Total Output Power: 100W max. (all lights combined)
Output Voltage Ranges: 13 to 24V, 7 to 24V, 15.5 to 24V
Voltage Control Response: 7 to 24V in 97.0 ms or less; 24 to 7V in 27.0 ms or less
External On/Off Response: Off to On in 98.5 ms or less; On to Off in 25.0 ms or less
Voltage Control Resolution: 1000 levels (10-bit)
Input Power: 100 to 240 VAC nominal (85 to 264 VAC permitted), 410 VA typical, 50/60 Hz
Over-voltage Category: Category II
Fault Detection: Output over-current, Output over-voltage, cooling fan stopped, abnormal temperature
Electrical Inputs: 10 inputs, 5 - 24 VDC, for selecting intensity; 1 input for light enable/disable
Electrical Outputs: 1, 5 - 24 VDC, to indicate fault
Ethernet: TCP/IP, IEEE802.3 (10BASE-T) and IEEE802.3u (100BASE-TX)

Mechanical

Weight: 1500 g

Environmental

Operating Temperature: 0°C to +40ºC
Operating Humidity: 20 to 70%RH up to 31°C; 20 to 50% RH up to 40°C; no condensation
Storage Temperature: -20°C to +65ºC
Storage Humidity: 20 to 85% RH
Altitude: Under 2000 m
Cooling: Forced air

Connectors

Power Connector: IEC 60320 C14 "PC type" receptacle
High-Power Output: 1x NJC-204-RF (100W max.)
Low-Power Outputs: 4x SMP-03V-BC (70W max. each)
I/O Connector: XG4A-2031
Ethernet Connector: RJ45

Standards

Conformance RoHS, China RoHS, PSE, CE (EN61010-1, EN55011, EN61000-6-2)

Loading...


See Resources section below to download drawings.

Disabled resource link Drawing (PDF)
Disabled resource link Drawing (DXF)
Disabled resource link Drawing (STEP)
Disabled resource link Manual


Sign In or Register to unlock all links above.

Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.

Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)