LSOG1920
Opto Engineering EL12MP1240
1/1" 12 mm 12 MP Liquid Lens
Not available for purchase outside of Americas.The Opto-Engineering EL12MP1240 lens provides near-instant electrical adjustment of the lens's focus.
The Opto-Engineering EL12MP lenses enable dynamic focus adjustments via the integrated Optotune liquid lens. Guaranteed by the manufacturer for over a billion cycles, and enhanced by a thermal calibration algorithm, the liquid element is fast and efficient.
The EL12MP series are designed for up to 12 MP cameras, having up to a 1.1" format. Liquid lens controller and cable are sold separately.
Electrical
| Current Range: | -200 to 300 mA |
Mechanical
| Lens Mount: | C-Mount |
| Length: | 74.1 mm |
| Filter Thread: | M40.5 x .5 |
| Phase Adjustment: | Yes |
Optical
| Lens Type: | General |
| Focal Length: | 12 mm |
| Distortion: | < 4.00 % |
| Minimum Object Distance: | 200 mm |
| F#: | 4.0 |
| Image Circle: | 17.60 mm (1.1") |
| Liquid Lens Model: | Optotune EL-12-30 |
| Temperature Sensor: | Yes |
| Focal Power Mode: | Yes |
| Response Time: | 3 ms (typical at 30°C, 0 to ±250 mA step) |
| Settling Time: | 20 ms (typical at 30°C, 0 to ±250 mA step) |
| Lifecycles: | > 1,000,000,000 (10% to 90% sinusoidal) |
Environmental
| Operating Temperature: | 0 to 40°C |
| Storage Temperature: | 0 to 50°C |
| Operating Humidity: | 20 to 85%, non-condensing |
Connectors
| Connector: | HR10A-7R-6PB |
Learn about lenses in our Lens Tech Center.
Loading...
Please contact us for information about any manufacturer's warranty.
Items configured with options marked NC/NR cannot be canceled or returned. Special order items and open cartons cannot be returned unless defective as covered by the manufacturer's warranty. The return of item quantities exceeding that normally stocked by Machine Vision Store will be subject to a restocking fee. All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions.
