The Basler Ace 2 a2A4504-5gmIP67 GigE monochrome camera offers great value.
This Basler ace 2 IP67 camera provides the protection many industrial installations require. The IP67 rating indicates the camera (when combined with an appropriate lens or lens housing) will be protected against dust and water. Specifically, it has been tested for submersion in 1 meter of water for 30 minutes, without harmful damage.
Now you can have the image quality and software capabilities that Basler is known for, but in a sealed package ready for the factory floor. This camera has an M12 data connector and M8 I/O connector on the back. There are no rubber gromets to drill, or to leak. The GigE Vision interface enables cable runs of up to 100 meters.
Electrical
| Opto-Coupled Input: | x1, 0 to 24 VDC |
| General Purpose I/O: | x2, 0 to 24 VDC |
Mechanical
| Lens Mount: | C-Mount |
| Size: | 44.9 x 31.0 x 31.0 mm without lens mount and connectors; 61.3 x 31 x 31 mm with lens mount and connectors |
| Weight: | < 75 g |
Environmental
| Housing Temperature Operating: | -10 to 60 °C (14 to 140 °F) |
| Ingress Protection: | IP67 (when used with an appropriate lens or lens housing) |
| Storage Temperature: | -30 to 80 °C (-22 to 176 °F) |
| Operating Humidity: | 20 to 80%, relative, non-condensing |
| Storage Humidity: | 20 to 80%, relative, non-condensing |
Miscellaneous
| Sensor Resolution: | 4,504 (h) x 4,504 (v) pixels |
| Sensor Size: | 17.45 mm (1.1") |
| Sensor Model: | Sony IMX541-AAMJ |
| Chroma: | Monochrome |
| Shutter Type: | Global |
| Frame Rate (full resolution): | 5.0 frames/second |
| Quantum Efficiency: | 66.2 % |
| Dark Noise: | 2.2 e- |
| Saturation Capacity: | 9.7 ke- |
| Dynamic Range: | 70.9 dB |
| Signal-to-Noise Ratio: | 39.9 dB |
| Test Method: | IP67 |
| Data Interface: | Ethernet Gig-E Vision |
| Data Rate: | Gigabit Ethernet |
| Approvals: | CE (including RoHS), EAC, UKCA, UL, FCC, KC, GenICam, GigE Vision, IP67, IEEE 802.3af (some approvals may be pending) |
| Country of Origin: | Germany |
| US HTS Code: | 8525893000 |
Connectors
| I/O/P Connector: | M8, 6-pin, female |
| Data Connector: | M12, 8-pin, X-coded, receptacle |
Learn about camera specs in our Camera Tech Center.
This camera is warranted by the manufacturer to be free from defects in materials and workmanship under normal use for a period of three (3) years from the date of original factory manufacture.
Small quantities of cameras normally stocked by Machine Vision Store may be returned within 30 days, subject to a 20% restocking charge, if original package is unopened and in new condition. Larger quantities are subject to Basler's 40% restocking charge. Open packages may not be returned.
