The Basler a2A1280-125umSWIR camera enables innovative imaging solutions. Built on the Sony IMX990 image sensor, it will capture images across the full spectrum of visible to short-wave infrared.
This short-wave infrared camera with standard USB3 Vision interface offers several features important for challenging installations.
> Sequencers enable the rapid capture of multiple frames using different parameter settings. For example, capturing a couple images using different exposure durations enables construction of HDR images.
> Bloom reduction parameter minimizes photons spilling over into adjacent pixels.
Due to dual-use export controls applying to this item, purchase requires written information on the intended use and final destination.
Loading...
Input Line: | 1 opto-coupled input line; 30 VDC absolute max. |
General Purpose Lines: | 2 general purpose I/O. 30 VDC absolute max. 50 mA maximum load when configured as output. |
Lens Mount: | C-Mount |
Operating Housing Temperature: | -10–50 °C (14–122 °F) |
Operating Humidity: | 20–80 %, relative, non-condensing |
Storage Temperature: | -20–80 °C (-4–176 °F) |
Storage Humidity: | 20–80 %, relative, non-condensing |
Housing Temperature Limit: | max. 70 °C (158 °F) per UL 62368-1 |
Ambient Temperature Limit: | max. 30 °C (86 °F) per UL 62368-1 |
Sensor Resolution: | 1,280 (h) x 1,024 (v) pixels |
Sensor Size: | 8.28 mm |
Sensor Model: | Sony IMX990 |
Chroma: | Monochrome |
Shutter Type: | Global |
Frame Rate (full resolution): | 125.0 frames/second |
Data Interface: | USB3 Vision |
Data Rate: | USB 3.0 Only (5 Gbps) |
Spectral Response: | 400 to 1650 nm above 70% relative quantum efficiency |
Country of Origin: | Germany |
US HTS Code: | 8525893000 |
Data Connector: | USB 3.0 Micro-B connector with screw lock |
I/O Connector: | M8 6-pin male, A-coded, per IEC 61076-2-104 |
Conformance | CE, EAC, GenICam, IP30, KC, RoHS, UL, USB3 Vision |
Learn about camera specs in our Camera Tech Center.
Loading...
This camera is warranted by the manufacturer to be free from defects in materials and workmanship under normal use for a period of three (3) years from the date of original factory manufacture.
Items configured with options marked NC/NR cannot be canceled or returned. Special order items and open cartons cannot be returned unless defective as covered by the manufacturer's warranty. The return of item quantities exceeding that normally stocked by Machine Vision Store will be subject to a restocking fee. All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions.