Image shows a SVS-Vistek shr411MXGE


SVS-Vistek shr411MXGE

14,192 x 10,640 Monochrome 10GigE Camera

Not available for purchase outside of North America.
Please contact us for a quote.
151 MP 14,192 x 10,640 resolution
6.1 FPS over 10GigE interface
Sony 411ALR image sensor

The SVS-Vistek shr411MXGE camera offers outstanding image quality. It delivers 151 MP at 6.1 FPS over a 10GigE interface. This camera is build on the Sony IMX411 medium-format image sensor having a rolling shutter. Configure the camera for 8, 12 or 16 bit pixel depth.


The 10 GigE Vision interface delivers up to 1.1 GB/s of image data, over long cable runs. This camera is GigE Vision and GenIcam standard compliant, with a GenTL driver. Burst mode is enabled by temporary on-camera image buffering.

Support for PoE+ is available by special request.


This 10 GigE camera's features include: ROI, LUT, binning, offset, auto-exposure, defect pixel correction and, on color cameras, manual and automatic white balance.


This camera has a M72 lens mount, enabling you to pair it with the optimal lens for your project. We offer a variety of lens mount adapters. And be sure to check our selection of quality lenses for large format sensors.


This camera's flexible electrical interface includes 3 inputs and 4 outputs, plus support for RS232 communication with a lens or light controller. Features include programmable IO logic, a sequencer, timer, SafeTrigger and an integrated 4-channel LED strobe controller. The light controllers can be adjusted via the GenICam parameter tree. GenICam compliant software, or the SDK API, can therefore adjust the light settings for a seamlessly integrated solution.


Inputs: 3 total, 24 VDC, one optically isolated
Power consumption: 17 W (depending on operating mode)
Outputs: 4 total, 24 VDC, with support for PWM (up to 3 amps for 40 ms, or 0.3 amps continuously)
Input Voltage: 10 - 25 VDC
PoE+: Power-over-Ethernet-Plus is available on special request
RS-232: Yes (RXD, TXD)


Lens Mount: M72 x 0.75
Sensor Coverglass: Borofloat B2700i, AR coating


Ambient Temperature: -10 to 45 °C
Ambient Humidity: 10 to 90% (non-condensing)
Ingress Protection: IP30


Sensor Resolution: 14,192 (h) x 10,640 (v) pixels
Sensor Size: 66.69 mm
Sensor Model: Sony
Chroma: Monochrome
Shutter Type: Rolling
Frame Rate (full resolution): 6.1 frames/second
Dynamic Range: 82.0 dB
Signal-to-Noise Ratio: 46.7 dB
Data Interface: Ethernet Gig-E Vision
Data Rate: 10 Gigabit Ethernet


I/O Connector: Hirose 12-pin male (HR10A-10R-12P)
Data Connector: RJ45 port (GigE Vision TYPE090)


Conformance GigE Vision

Dynamic range and SNR specifications depend on the environment.

Learn about camera specs in our Camera Tech Center.

The manufacturer will repair or replace defective cameras within two years of factory shipment. For further information, please refer to the manufacturer's website.

Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)