The SVS-Vistek exo991MGE camera offers 640 x 512 resolution at 260 FPS, a standard GigE Vision interface, and the ability to solve unique imaging problems. It is built on the Sony IMX991 image sensor.
The large internal memory enables capturing a burst of images that are then sent over Ethernet, as bandwidth allows.
SWIR (short-wave infrared) cameras can reveal features that are otherwise invisible. See flaws, contaminants, and moisture in a variety of materials. Imaging in NIR or SWIR can often see through features you wish to ignore, such as pigments, fog, and some plastics. SWIR can also be used to differentiate between some chemicals based on their different absorption spectra. For example, at 1450 nm, a bottle of water is opaque but a bottle of mineral oil is transparent.
Using SenSWIR technology from Sony, this camera produces a homogeneous image across wavelengths ranging from 400 to 1700 nm. This can enable innovative solutions that combine images captured in the visible, NIR, and SWIR ranges. Use the camera's integrated 4-channel strobe controller to power one of our multi-channel SWIR LED lights.
|Power:||PoE, or 3.5 W @ 10 - 25 VDC|
|Inputs:||3 total, 24 VDC, one optically isolated|
|Outputs:||4 total, 24 VDC, with support for PWM (up to 3 amps for 40 ms, or 0.3 amps continuously)|
|RS232 Interface:||Additional input for RXD and output for TXD|
|Memory:||256 MB SDRAM, 32 MB Flash|
|Dimensions:||50 x 50 x 43 mm|
|Operating Temperature:||-10 to 60 °C (housing)|
|Operating Humidity:||10 to 90 % (non-condensing)|
|Sensor Resolution:||640 (h) x 512 (v) pixels|
|Sensor Size:||4.19 mm|
|Sensor Model:||Sony IMX991|
|Frame Rate (full resolution):||260.0 frames/second|
|Dynamic Range:||57.0 dB|
|Data Interface:||Ethernet Gig-E Vision|
|Data Rate:||Gigabit Ethernet|
|I/O Connector:||Hirose 12-pin male (HR10A-10R-12P)|
|Data Connector:||RJ45 Socket|
Learn about camera specs in our Camera Tech Center.
The manufacturer will repair or replace defective cameras within two years of factory shipment. For further information, please refer to the manufacturer's website.
We're interested in making sure you're happy with your purchase. Some models are available for a 30-day evaluation. The return of cameras is subject to factory discretion. Any cameras approved for return must be in new condition and in their original packaging. Returns will be subject to a restocking fee.
All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions. The item's serial number and associated sales order number will be needed.