The Basler imaWorx frame grabber enables connecting up to four CoaXPress high-bandwidth cameras to your computer. The four CXP-12 channels can work together to deliver 50 Gbps combined bandwidth. This card employs DMA7200 technology to push up to 7.2 GB/s across your PCIe 3.1 x8 bus.
This imaWorx card can also power your cameras via Power-over-CoaXPress (PoCXP) for simplified installation.
Built-in processing functions include inversion, region-of-interest, white balance, mirroring, image selector, and LUT.
Software tools available are:
> microDisplay for acquisition control and viewing
> microDiagnostics for analysis and service
> GenICam Explorer for camera configuration
> Device drivers
Some of the above may be licensed separately.
A GenTL provider enables use with Matrox MIL and other popular machine vision software. There are also custom interfaces available for Cognex VisionPro, MVTec Halcon, and National Instruments Labview.
|Interface:||CoaXPress 2.0/2.1, CXP-12, 4 x 12.5 Gbps|
|Camera Support:||1, 2, 3 or 4 cameras, line scan (16K max) or area scan (32k x 64k max), 8 - 16 bit grayscale or 24 - 48 bit color|
|PoCXP:||17W at 24V DC regulated power, per CXP connector|
|Power Consumption:||Typ. 13.4W @ 12V (excluding camera and I/O power output)|
|Processor:||Xilinx Ultrascale+ KU3P|
|Memory:||1.5 GByte DDR4-RAM|
|PC Bus Interface:||PCIe 3.1 x8, 6520 MB/s typical max.|
|Front GPIO:||4 electrically isolated inputs, 2 TTL 5V outputs, RS485 (configurable)|
|Additional GPIO:||8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V)|
|GPIO Synchronization & Control:||Configurable Trigger System supporting several trigger modes and shaft encoder functionality with backward compensation, multi-camera-synchronization|
|Dimensions:||PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height|
|Operating Temperature:||0 - 50°C (32°F - 122°F)|
|Storage Temperature:||-50 - 80°C (-58°F - 176°F)|
|Operating Humidity:||5% - 90% rH non-condensing|
|Storage Humidity:||0% - 95% rH|
|Software Compatibility:||Cognex VisionPro, Matrox MIL (via GenTL), MVTec Halcon, National Instruments Labview|
|GenTL Support:||Yes, if camera is GenICam compatible|
|Supported OS:||Windows 10 / 8 / 7 (32-Bit), Windows 10 / 8 / 7 (64-Bit), Linux 64-Bit|
|Camera Connectors:||4 x Micro-BNC/HD-BNC|
|GPIO Connector:||DB15 micro female, Molex 83612-9020 (compatible with Molex 083422-9018 cable)|
|Conformance||KC, WEEE, REACH, RoHS, CE class A, FCC class B|
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)