CRBR152
Basler 4C (2200000702)
CoaXPress 2.0 Interface Card, 4 camera
Not available for purchase outside of North America.Please contact us for a quote.
4 Channel CXP-12 interface
Compatible with Basler Pylon software
Must be ordered with Basler camera
This Basler 4C interface card can grab images from up to four Basler CXP-12 cameras, such as the Boost series.
The Basler "C-series" cards make the transition to CoaXPress easy for existing Basler users. It is compatible with the popular Basler Pylon software suite. Just as with GigE Vision and USB3 Vision, use Pylon Viewer to configure CoaXPress cameras. Code written against the Pylon API needs only small adjustments to enable communication with Basler CoaXPress cameras.
Orders for this item are only accepted if purchased with a Basler CoaXPress camera.
Electrical
| Camera Interface: | CoaXPress 2.0, CXP-12 |
| Camera Support: | Area scan type; Mono (8/16 bit depth) or Bayer (24 or 48 bit) |
| Processor: | Xilinx Ultrascale+ KU3P |
| GPIO: | 3 differential input signals or 2 differential and 1 single-ended signal or 4 single-ended signals; 2 TTL-complaint output signals; max. voltage of the input signals between 4.5V and 25V |
| Memory: | 1.5 GByte DDR4-RAM |
| PC Bus Interface: | PCIe 3.1 x8 for 7876 MB/s (theoretical), 6520 MB/s (typical) |
| Power Consumption: | 13.4W @ 12V typical, excluding camera and I/O power output |
Mechanical
| Dimensions: | PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
Environmental
| Operating Temperature: | 0 - 50°C (32°F - 122°F) |
| Storage Temperature: | -50 - 80°C (-58°F - 176°F) |
| Operating Humidity: | 5% - 90% RH, non-condensing |
| Storage Humidity: | 0% - 95% RH |
Miscellaneous
| Software API: | Basler Pylon SDK |
Connectors
| Camera Connectors: | 4 x Micro-BNC/HD-BNC |
| I/O Connector: | D-Sub Micro-D, 15-pin |
Standards
| Conformance | WEEE, REACH, RoHS, CE class B, FCC class B |
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)