1 Channel CXP-12 interface
Compatible with Basler Pylon software
Must be ordered with Basler camera
This Basler 1C interface card is compatible with Basler single-channel CXP-12 cameras, such as the Boost series.
The Basler "C-series" cards make the transition to CoaXPress easy for existing Basler users. It is compatible with the popular Basler Pylon software suite. Just as with GigE Vision and USB3 Vision, use Pylon Viewer to configure CoaXPress cameras. Code written against the Pylon API needs only small adjustments to enable communication with Basler CoaXPress cameras.
Orders for this item are only accepted if purchased with a Basler CoaXPress camera.
Electrical
| Camera Interface: | CoaXPress 2.0, CXP-12 |
| Camera Support: | Area scan type; Mono (8/16 bit depth) or Bayer (24 or 48 bit) |
| Processor: | Xilinx Ultrascale+ KU3P |
| GPIO: | 3 differential input signals or 2 differential and 1 single-ended signal or 4 single-ended signals; 2 TTL-complaint output signals; max. voltage of the input signals between 4.5V and 25V |
| Memory: | 1.0 GByte DDR4-RAM |
| PC Bus Interface: | PCIe 3.1 x4 for 3938 MB/s (theoretical), 3260 MB/s (typical/max.) |
| Power via PCIe Slot: | 12 VDC, < 1.5 A; actual current depends on processing load |
| Power via 6-pin connector: | 12 VDC, < 2 A. Power via 6-pin connector is required when powering camera via PoCXP. Actual values depend on the connected PoCXP camera. |
Mechanical
| Dimensions: | PCIe Standard height, low profile card: 167.64 mm length x 68.9 mm height |
| Weight: | 180 g |
Environmental
| Operating Temperature: | 0 - 50°C (32°F - 122°F) |
| Storage Temperature: | -50 - 80°C (-58°F - 176°F) |
| Operating Humidity: | 5% - 90% RH, non-condensing |
| Storage Humidity: | 0% - 95% RH |
Miscellaneous
| Software API: | Basler Pylon SDK |
Connectors
| Camera Connectors: | 1 x Micro-BNC/HD-BNC |
| I/O Connector: | D-Sub Micro-D, 15-pin |
Standards
| Conformance | WEEE, REACH, RoHS, CE class B, FCC class B |
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)