Image shows a Leimac IPSA-7M2-C2

LTLC9212

Leimac IPSA-7M2-C2

Light Controller, PoE, 2 Channels with Overdrive

Not available for purchase outside of US & Canada.
Please contact us for a quote.
Power over Ethernet for simplified wiring
2-channel output with overdrive
TCP/IP interface

The Leimac IPSA-7M2-C2 light controller is powered over Ethernet (PoE) for simplified installation. It complies with the PoE IEEE802.3af standard. You can connect it to the same network as your PoE cameras, eliminating unnecessary cable runs and reducing installation costs.

This controller can strobe LED lights at up to 36 volts for much higher illumination intensity. The two output channels are clamped at a combined total of 7.8 watts. Although higher-current lights can be connected, they won't operate at full intensity.

Adjustable light parameters include:

> Lights enabled (on/off)

> Trigger mode (internal/external)

> Maximum voltage (12 - 36 volts, depending on the light)

> Applied voltage (12 to the maximum voltage, with 1024 levels)

> Strobe duration (0 - 999 μs, in 1 μs intervals)

> Strobe delay (0 - 5000 μs, in 1 μs intervals)

Eight configuration sets can be programmed for later recall.

This controller has standard TCP/IP and UDP/IP interfaces. Most devices that support either of these protocols can adjust the light settings. A sample Windows application is available.

The trigger cable is included. On two-channel models, the light cables connect directly to this controller. On the four-channel models, a mini-DIN output cable is included. A LAN cable, a PoE injector, and a bracket for mounting on a 35 mm DIN rail are sold separately.

Loading...

Electrical

Output Channels: 2
Control Interfaces: Ethernet TCP/IP
Control Method: Voltage Control, Overdrive
Input Power: 320 mA max. at 48 VDC via PoE (IEEE802.3af)
Output Voltage: 12 - 36 VDC
Output Power: Total output current clamped at 7.8 W
Trigger Response: Approx. 1 μS

Mechanical

Size: 71.0 x 35.5. x 50.4 mm
Weight: 140g or less

Environmental

Operating Temperature: 0 to 40 °C
Operating Humidity: 20 to 70% RH, non-condensing

Standards

Conformance RoHS, CE EN55011 Group1 ClassA, EN61000-6-2, IEEE802.3af

Loading...


See Resources section below to download drawings.

Disabled resource link Drawing (PDF)
Disabled resource link Drawing (DXF)
Disabled resource link Manual
Disabled resource link Software Control Application


Sign In or Register to unlock all links above.

Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.

Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)