Machine Vision Store

The Leimac IPPA-7M4-C2 light controller is powered over Ethernet (PoE) for simplified installation. It complies with the PoE IEEE802.3af standard. You can connect it to the same network as your PoE cameras, eliminating unnecessary cable runs and reducing installation costs.

Total output power is 12 VDC clamped at 7.8 watts. You can connect more powerful lights, but they won't operate at full intensity.

Adjustable light parameters include:

> All lights enabled (on/off)

> Trigger mode (internal/external)

> External trigger delay (0 - 99.99 ms, in 10 μs intervals)

> Illumination intensity (0 - 100% PWM)

> On duration for each light (0 - 99.99 ms, in 10 μs intervals)

Four configuration sets can be programmed for later recall.

Adjustable light parameters include:

> Lights enabled (on/off)

> Trigger mode (internal/external)

> Maximum voltage (12 - 36 volts, depending on the light)

> Applied voltage (12 to the maximum voltage, with 1024 levels)

> Strobe duration (0 - 999 μs, in 1 μs intervals)

> Strobe delay (0 - 5000 μs, in 1 μs intervals)

Eight configuration sets can be programmed for later recall.

This controller has standard TCP/IP and UDP/IP interfaces. Most devices that support either of these protocols can adjust the light settings. A sample Windows application is available.

The trigger cable is included. On two-channel models, the light cables connect directly to this controller. On the four-channel models, a mini-DIN output cable is included. A LAN cable, a PoE injector, and a bracket for mounting on a 35 mm DIN rail are sold separately.