CRNS802
Neousys
2-Port GigE PoE Adapter, PCIe
Price: $224.00 each
Not available for purchase outside of North America.Please sign in to check inventory.
THIS ITEM IS END OF LIFE. Small quantities may still be available from inventory. (See Resources below for a link to suggested replacement.)
This two-port PCI Express (PCIe x4) network adapter can power PoE cameras and other devices via the data cable. This saves the expense of purchasing external power supplies and running additional cables. Each port can deliver 15.4 W of power and 1000 Mb/s bandwidth over a CAT-5/CAT-6 cable of up to 100 meters.
This network adapter is ideal for high-bandwidth devices, such as machine vision cameras. The two Intel 82574L Ethernet controllers are independent, so traffic on one network does not interfere with traffic on the other. Each controller supports jumbo frames, up to 9 KB, for greater efficiency. Link aggregation ("teaming") is also supported.
This network adapter and the connected devices are powered via the computer's PCIe bus. No external power supply is needed.
We recommend use with our shielded CAT-6 cables.
Electrical
| Bus Interface: | PCI Express x4 |
| Controllers: | Intel 82574L |
| Maximum Frame Size: | 9 KB |
| Link Aggregation (Teaming): | Yes |
| Input Power: | 1.6 A max @ 3.3 V and 2.8 A max @ 12 V (from PCIe bus) |
| Output Power: | 15.4 W max per port |
Mechanical
| Dimensions: | 167.7 mm (W) x 111.2 mm (H) |
Environmental
| Operating Temp.: | 0 - 60 deg. C with air flow |
Standards
| Conformance | IEEE 802.3af |
Datasheet (PDF)
4-Port PoE Network Adapter
Ethernet Cables
User's Manual (PDF)
Newer 2-port PoE adapter CRNS803
Sign In or Register to unlock all links above.
Please contact us for information about any manufacturer's warranty.
Items configured with options marked NC/NR cannot be canceled or returned. Special order items and open cartons cannot be returned unless defective as covered by the manufacturer's warranty. The return of item quantities exceeding that normally stocked by Machine Vision Store will be subject to a restocking fee. All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions.