CRNS811
Neousys PCIe-PoE454at
5GbE PoE Adapter, 4-Port
Price: $674.00 each
Not available for purchase outside of North America.Please sign in to check inventory.
This network adapter has four 5Gbit Ethernet ports to enable communication with 5Gbit, 2.5Gbit, 1Gbit and 100Mbit cameras, as well as other devices. Familiar Cat-5e / CAT-6 twisted-pair copper cable and RJ-45 connectors will keep installation costs to a minimum.
This camera has been tested by Neousys to be compatible with leading 5G camera manufacturers. The card performed without error during a 100-hour full-load test.
This adapter's IEEE 802.3bz PoE+ capability enables powering devices over Ethernet, with 25.5 W available per port. Power to each port can be independently switched on and off via the free software API.
Electrical
| Bus Interface: | 4-lanes, Gen3 PCI Express interface, compliant with PCI Express Base Specification Revision 3.0 |
| # of 5G Port: | 4x 5GBASE-T Ethernet ports by four Marvel AQC111C 5G controllers, supporting 5G, 2.5G, 1G, 100M link speed |
| PoE Capability: | In compliance with IEEE 802.3at-2009 (PoE+), each port delivers up to 25.5 W of power |
| Power Requirement: | Maximum 5.5 A@12V (66W) from PCIe gold finger connector Maximum 8.5 A@12V (102W) with onboard 6-pin PCIe power connector connected |
Mechanical
| Ethernet Connector: | 4x RJ-45 connectors |
| Dimension: | 167.7 mm (W) x 111.2 mm (H) |
Environmental
| Operating Temperature: | 0°C ~ 55°C with airflow |
Connectors
| Cable Requirement: | CAT-5e or CAT-6 cable, 100 meters maximum |
Standards
| Conformance | CE Class A, according to EN 55032/55035 FCC Class A, according to FCC Part 15, Subpart B |
Please contact us for information about any manufacturer's warranty.
Items configured with options marked NC/NR cannot be canceled or returned. Special order items and open cartons cannot be returned unless defective as covered by the manufacturer's warranty. The return of item quantities exceeding that normally stocked by Machine Vision Store will be subject to a restocking fee. All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions.