This camera enclosure will protect the CASA200, CASA201 and CASA202 HDMI cameras from light impact, dust, dirt, splashed water and idle hands.
The standard cable gland at the bottom of the enclosure uses a split insert to provide a watertight seal around one or more cables. The gland allows passage of standard molded cables without removal of the connectors.
Once the enclosure cover is removed, you have full access to the camera and lens, simplifying focus and aperture adjustments. Mount the camera in a forward position, to reduce reflections when using shorter lenses. Or mount it further away to allow for longer lenses. This camera enclosure readily accommodates large diameter lenses or ringlights up to 50mm in diameter (lit area).
The camera enclosure's cover is constructed of 16 gauge 304 stainless steel. Its base is 1/4" 6061 aluminum. All external fasteners are 18-8 stainless steel. Fasteners to mount the camera are included.
The enclosure base has been drilled and tapped for our standard mounting system. Purchase two BTIS100 kits to mount this enclosure on a 1" rod.
Options include air cooling, air curtain window, and assorted cable entry fittings. Shown in the image with optional camera, lens and brackets available at extra cost.
|Enclosure Cover:||304 stainless steel, 16 gauge|
|Enclosure Base:||6061 Aluminum, 1/4"|
|Fasteners:||18-8 Stainless Steel|
|Weight:||3.2 lbs (without camera)|
|Integrity:||Enclosure meets NEMA 12 standard, unless configured with air curtain option|