BRGN1056
Neousys
Fanless Computer, i7-3610QE CPU, PoE, USB3
Price: $2,350.00 each (obsolete)
Not available for purchase outside of North America.Please sign in to check inventory.
CLEARANCE. This item has been discontinued by Machine Vision Store, and the manufacturer may no longer produce additional quantities.
Purchase recommended for spare parts and replacement only.
NO MOVING PARTS
Why should you choose a computer without moving parts? Because it’s the moving parts that fail first. When a cooling fan stops turning, or the hard-disk drive stops spinning, it is sure to be expensive.
It isn’t hard to build a consumer-grade “gaming” computer. But building a fanless system that can handle industrial environments is another matter altogether. The Neousys design puts the CPU right up against the large external heat sink. It can handle 60 degrees C, even with its 3rd generation Ivy Bridge i7 CPU under full load.
HIGH PERFORMANCE
Compare the performance of the i7-3610QE against other fanless embedded computers intended for machine vision. This computer scored 7522 using Passmark Performance Test software on the Windows 7 64-bit OS. That’s 218% to 300% better than top competing models. (See the Resources tab to download a detailed comparison.)
The CRNS350 has five Gigabit Ethernet ports. Four of those ports can deliver Power-over-Ethernet, so cameras and other devices can be powered without pulling additional cables or purchasing external power supplies. To maximize bandwith, each port has an independent Intel I210 controller with dedicated PCIe interface. All ports support jumbo packets to keep CPU interrupts to a minimum. The I210 controller is supported by the Basler Pylon Performance Driver (version 4.1.0 and newer) to further enhance imaging performance.
DISCRETE I/O
The CRNS350 includes built-in discrete I/O for interfacing with PLCs, light controllers, and other devices. The eight 5 - 24 VDC inputs are optically isolated, and can be programmed for polling or change-of-state interupt. There are also eight Power MOSFET magnetically-isolated discrete outputs.
DELIVERY & CUSTOMIZATION
Our standard configuration, appropriate for many projects, usually ships the next business day. It includes four Power-over-Ethernet (PoE) ports, eight discrete inputs, eight discrete outputs, and four megabytes of DDR3 RAM. The 128 gigabyte Solid-State Drive has no moving parts to fail, and enables the system to boot in just seconds. Microsoft Windows 7 Pro for Embedded 64-bit factory installed.
Alternate configurations are available for volume customers. Note we offer a version having eight independent PoE ports.
Electrical
| Processor: | Intel Core i7-3610QE (2.3/3.3 GHz, 6 MB cache) |
| Chipset: | Intel HM76 Platform Controller Hub |
| Graphics: | Integrated Intel HD Graphics 4000 Controller |
| Memory: | 2x 204-pin SO-DIMM Sockets; Ships with 4GB DDR3 Memory Installed |
| Storage Interface 1: | 1x Internal SATA Port for 2.5" HDD/SSD |
| Storage Interface 2: | 1x CFast Socket |
| Storage (SSD): | Ships with 2.5" 128 GB MLC SSD for 0 to 70 deg. C Operating Temps |
| Expansion (Cassette): | 1x PCIe x16 Slot @ 8-lanes in Removable Cassette (Optional Fan) |
| Expansion (Internal): | 1x mini PCIe Socket with USIM Socket; 1x Internal mini PCIe Socket |
| Ethernet (Ports): | 5x Gigabit Ethernet Ports each with Dedicated Intel I210 Controller and PCIe Interface; Up to 9.5 KB Jumbo Frames with Teaming |
| Ethernet (PoE): | Four of the Gigabit Ethernet Ports provide up to 15.4 W Power-over-Ethernet |
| Video (Analog): | 1x DB-15 Connector for Analog RGB, up to 2048 x 1536 Resolution |
| Video (Digital): | 2x DVI-I Connectors for DP/HDMI/DVI Outputs, up to 2560 x 1600 (DP) or 1920 x 1080 (DVI/HDMI) Resolution |
| USB: | 4x USB 3.0 Ports; 4x USB 2.0 Ports |
| Serial Ports: | 2x Software-Programmable RS-232/422/485 Ports with DB-9 Connectors |
| Discrete Inputs: | 8x 5 - 24 VDC Optically Isolated Inputs via shared DB-25 Connector, Configurable High/Low State, supports Polling and Change-of-State Interrupts |
| Discrete Outputs: | 8x Power MOSFET with Analog Devices iCoupler via shared DB-25 Connector, Sink Type Normally Open |
| Keyboard/Mouse: | 1x 6-Pin mini-DIN Connector for PS/2 Keyboard/Mouse |
| Audio: | 1x Mic-In; 1x Speaker-Out |
| Power Input: | 1x 3-Pin Removable Terminal Block for 8 - 25 VDC; 1x 4-Pin Connector for use with optional AC Adapter having 8 - 25 VDC Output |
Mechanical
| Dimensions: | 240 mm (W) x 225 mm (D) x 88 mm (H) |
| Weight: | 4.4 Kg |
| Mounting: | Wall or Panel Mount Brackets Included; DIN-Rail Mount Bracket Optional |
Environmental
| Operating Temp.: | 0 - 60 deg. C as Configured, -25 - 70 deg. C Configuration Optional |
| Storage Temp.: | -40 - 85 deg. C |
| Humidity: | 10 - 90% rH, non-condensing |
| Vibration: | Operating, 5 Grms, 5-500 Hz, 3 Axis (IEC60068-2-64) |
| Shock: | Operating, 50 Grms, Half-sine 11 ms Duration (IEC60068-2-27) |
| EMC: | CE/FCC Class A (EN 55022 & EN 55024) |
Miscellaneous
| MTBF: | 93,732 hours |
| Operating System: | Microsoft Windows 7 Pro for Embedded 64-bit factory installed; Other options available |
Standards
| Conformance | CE, FCC |
The original factory warranty may have expired on this item, or the warranty may not be applicable. If the original manufacturer's warranty is invalid at the time of your purchase, then Machine Vision Store will warranty the Overstock item, under the same terms and conditions as the manufacturer's warranty, for a period of 30 days from shipping. Returns are not accepted on obsolete items unless they are found to be defective under warranty.