CASK1003
SVS-Vistek hr120MCL
13272 x 9176 Monochrome CL Camera
Price: $14,545.00 each
Not available for purchase outside of North America.Please sign in to check inventory.
The SVS-Vistek hr120MCL monochrome camera delivers 13,272 x 9176 pixel resolution at 6.8 FPS (1x10-1y) or 5.5 FPS (1x8-1y) over an 80-bit Camera Link Full interface. It is built on the Canon 120MXSM image sensor.
SVS-Vistek's HR Series Camera Link is ideal for surface inspection, quality control and flat panel inspection. These cameras offer high data rates, deterministic time response and very direct access to the image sensor. This can enable settings and operating modes that are not available with other interfaces.
The use of established standards such as GenICam and GenTL makes for rapid integration into the application. This camera offers a wide range of industrial hardware and software features.
TECHNICAL HIGHLIGHTS
> Camera Link Full 80-bit interface
> Power over Camera Link (PoCL)
> Defect pixel correction
> LUT, gamma, offset
> Integrated multi-channel LED strobe controller
> Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencer, timer, RS232
Electrical
| Inputs: | 3 total, 24 VDC, one optically isolated |
| Outputs: | 4 total, 24 VDC, with support for PWM (up to 3 amps for 40 ms, or 0.3 amps continuously) |
| Input Power: | Either Power-over-Camera Link, or 10 - 25 VDC |
| RS-232: | Yes (RXD, TXD) |
Mechanical
| Lens Mount: | M58x0.75 |
Environmental
| Ingress Protection: | IP30 |
| Operating Temperature: | -10 to 45°C |
Miscellaneous
| Sensor Resolution: | 13,272 (h) x 9,176 (v) pixels |
| Sensor Size: | 35.50 mm |
| Sensor Model: | Canon 120MXSM |
| Chroma: | Monochrome |
| Shutter Type: | Global |
| Frame Rate (full resolution): | 6.8 frames/second |
| Data Interface: | Camera Link |
| Data Rate: | Camera Link Full |
Connectors
| I/O Connector: | Hirose 12-pin male (HR10A-10R-12P) |
| Data Connector: | Camera Link SD, qty 2 |
Learn about camera specs in our Camera Tech Center.
Loading...
Manual
Select a Lens for SVS-Vistek hr120MCL
Learn from our Camera Tech Center
Sign In or Register to unlock all links above.
The manufacturer will repair or replace defective cameras within two years of factory shipment. For further information, please refer to the manufacturer's website.
We're interested in making sure you're happy with your purchase. Some models are available for a 30-day evaluation. The return of cameras is subject to factory discretion. Any cameras approved for return must be in new condition and in their original packaging. Returns will be subject to a restocking fee.
All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions. The item's serial number and associated sales order number will be needed.
