This USB 3 Vision camera is manufactured by SenTech using the CMOSIS CMV4000 image sensor. It delivers 4 MegaPixel resolution at 89 frames per second, or up to 3500 frames per second if the configurable area-of-interest is set to 32 x 32 pixels. It supports 8, 10, and 12 bit video formats.
This camera has three general-purpose I/O that can be configured as inputs or outputs. There is also a hardware reset input. If using with the CEBR100 I/O cable, then Pin 1 (IO_GND) is Brown, Pin 2 (GPIO2) is Pink, Pin 3 (GPIO1) is Green, Pin 4 (GPIO0) is Yellow, Pin 5 (CAM_RESET) is Gray, and Pin 6 (White) is not used. Please see the manual for wiring details.
Lens Mount: | C-Mount |
Sensor Resolution: | 2,048 (h) x 2,048 (v) pixels |
Sensor Size: | 15.93 mm (1") |
Sensor Model: | CMOSIS CMV4000 |
Chroma: | Monochrome |
Shutter Type: | Global |
Frame Rate (full resolution): | 89.0 frames/second |
Data Interface: | USB3 Vision |
Data Rate: | USB 3.0 Only (5 Gbps) |
Learn about camera specs in our Camera Tech Center.
Loading...
Please contact us for information about any manufacturer's warranty.
Items configured with options marked NC/NR cannot be canceled or returned. Special order items and open cartons cannot be returned unless defective as covered by the manufacturer's warranty. The return of item quantities exceeding that normally stocked by Machine Vision Store will be subject to a restocking fee. All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions.