LTOG112-850
Opto Engineering LT2PRXP Series
LED Pattern Projectors
Not available for purchase outside of North America.Please contact us for a quote.
The Opto Engineering LT2PRXP-IR850-C is a high-power pattern projector with NIR 850 nm LEDs.
KEY ADVANTAGES
> High efficiency LEDs for sharp edges, superior homogeneity and contrast
> Compatible with standard C-mount lenses up to 1.1”
> Interchangeable projection patterns
> Compact design
The LT2PRXP series features high-power LED pattern projectors designed for inline or offline applications including quality control, 3D reconstruction, dimensional measurement, planarity control, robot guidance and alignment applications.
Featuring high-efficiency LEDs, they provide very high intensity and homogeneous light output.
This compact LED pattern projector is intended for strobed operation. Either a PNP or NPN input is used to trigger the strobe. An analog input can be used to dim the light intensity.
This LED pattern projector excludes the lens and pattern reticle, which are sold separately. A variety of grid and line patterns are available, as well as custom patterns. Please contact us for a recommendation based on your project requirements.
Electrical
| Drive Type: | Current Control |
| Power: | 45.0 W peak |
| I/O Interface: | PNP logic input, NPN logic input, analog dimming input |
| Power: | 24 VDC |
Mechanical
| Window: | Clear |
| Window Size: | 18 x 18 mm (0.7" x 0.7") |
| Lens Mount: | C-mount |
| Active Area Diameter: | 17.6 mm; Interchangeable apertures for 17.6, 16, and 11 mm format lenses are included. |
Environmental
| Operating Temperature: | 0 to 40°C |
| Storage Temperature: | 0 to 50°C |
| Operating Humidity: | 20 to 85%, non-condensing |
| Ingress Protection: | IP30 |
| Safety: | EN 62471:2010 Risk Group 1 |
Miscellaneous
| Type: | Pattern Projector |
| Wavelength: | 850 nm typical (Infrared) |
| Strobe Duration: | 2 µs to 10 ms |
| Strobe Duty Cycle: | 10% max. |
| Typical Strobe Delay: | 400 ns |
| Typical Jitter: | 100 ns |
Connectors
| Cable Length: | 0.2 m (0.7 ft) |
| Connector: | M12 5-pin male |
Loading...
The manufacturer warranties this device for 12 months from the effective delivery date with reference to the device serial number. Warranty covers the replacement or the repair of the defective part (components, device or part of it) with the exclusion of dismantling and shipping costs. Please refer to the device manual or manufacturer's website for details and limitations.
Please contact us for information regarding whether orders for this item can be cancelled or returned.
