LTOG111-W
Opto Engineering LT2PRXP Series
LED Pattern Projectors
Not available for purchase outside of North America.Please contact us for a quote.
The Opto Engineering LT2PRXP-W is a high-power pattern projector with white LEDs.
KEY ADVANTAGES
> High efficiency LEDs for sharp edges, superior homogeneity and contrast
> Built-in driver for continuous and strobe operations
> Compatible with standard C-mount lenses up to 1.1”
> Interchangeable projection patterns
The LT2PRXP series features high-power LED pattern projectors designed for inline or offline applications including quality control, 3D reconstruction, dimensional measurement, planarity control, robot guidance and alignment applications.
Featuring high-efficiency LEDs, they provide very high intensity and homogeneous light output.
The aluminum heat sink is designed to dissipate heat ensuring long lifetime of the LED module and driving electronics, even at the highest power rates. The integrated temperature sensor ensures automatic shut-down in case of overheating.
The cooling fins on this LED pattern projector enable either continuous-duty or strobe-duty operation, depending on how you wire it. Either a PNP or NPN input is used to trigger the strobe. An analog input can be used to dim the light intensity.
This LED pattern projector excludes the lens and pattern reticle, which are sold separately. A variety of grid and line patterns are available, as well as custom patterns. Please contact us for a recommendation based on your project requirements.
Electrical
| Power: | 1.0 A @ 24 VDC |
| I/O Interface: | PNP logic input, NPN logic input, analog dimming input |
| Power: | 24 VDC |
Mechanical
| Window: | Clear |
| Window Size: | 18 x 18 mm (0.7" x 0.7") |
| Lens Mount: | C-mount |
| Active Area Diameter: | 17.6 mm; Interchangeable apertures for 17.6, 16, and 11 mm format lenses are included. |
Environmental
| Operating Temperature: | 0 to 40°C |
| Storage Temperature: | 0 to 50°C |
| Operating Humidity: | 20 to 85%, non-condensing |
| Ingress Protection: | IP30 |
| Safety: | EN 62471:2010 Risk Group 2 |
Miscellaneous
| Type: | Pattern Projector |
| Color Temperature: | 5,700 K typical |
Connectors
| Cable Length: | 0.2 m (0.7 ft) |
| Connector: | M12 5-pin male |
Loading...
The manufacturer warranties this device for 12 months from the effective delivery date with reference to the device serial number. Warranty covers the replacement or the repair of the defective part (components, device or part of it) with the exclusion of dismantling and shipping costs. Please refer to the device manual or manufacturer's website for details and limitations.
Please contact us for information regarding whether orders for this item can be cancelled or returned.
