This fanless industrial computer offers it all: An industrial design free of moving parts, support for Power-over-Ethernet cameras and USB3 cameras, a CPU that can handle multiple cameras with high frame rates, a PCIe slot for a frame grabber or I/O, a wide temperature range, and optional integrated discrete 24VDC I/O. Combined with your choice of several powerful CPUs, this platform is ready for demanding industrial machine vision installations.
NO MOVING PARTS
Why should you choose a computer without moving parts? Because it’s the moving parts that fail first. When a cooling fan stops turning, or the hard-disk drive stops spinning, it is sure to be expensive.
It isn’t hard to build a consumer-grade “gaming” computer. But building a fanless system that can handle industrial environments is another matter altogether. The Neousys design puts the CPU right up against the large external heat sink. It can handle 70 degrees C (in 35W mode, or 50 degrees C in 65 watt mode) under full load.
HIGH PERFORMANCE
Compare the performance of these 11th and 12th generation CPUs against other fanless embedded computers intended for machine vision. We think you'll discover this computer is able to process images faster, while enabling you to run more powerful analysis algorithms.
You can adjust the BIOS of this computer to operate the CPU at either 35 watts or 65 watts. The lower power setting enables operation in ambient temperatures up to 70 degrees C, as compared to 50 degrees C for the higher power setting. Or choose the 65 watt mode for maximum performance.
This computer can be configured with up to six Ethernet ports. Four of those ports can deliver Power-over-Ethernet (as a factory option) so cameras and other devices can be powered without pulling additional cables or purchasing external power supplies. All ports support screw-lock connectors for reliable connections.
DISCRETE I/O
This industrial computer offers optional integrated discrete I/O for interfacing with PLCs, light controllers, and other devices. Choose the 16 channel board or the 32 channel board. The 5 - 24 VDC inputs are optically isolated, and can be programmed for polling or change-of-state interrupt. The 24 VDC discrete outputs are also isolated. (See accessories.)
DELIVERY, CUSTOMIZATION & ACCESSORIES
In addition to the configuration options listed on this page, alternate options are available for volume customers. Suggested accessories include power supply, DIN rail mount, I/O cable and I/O termination board.
Electrical
| CPU: | Supports Intel 12th, 13th and 14 generation CPUs |
| Chipset: | Intel® Q670E platform controller hub |
| Graphics: | Integrated Intel® UHD Graphics 770 (32EU) / 730 (24EU) |
| Memory: | Up to 64 GB DDR5 4800 SDRAM (two SODIMM slots) |
| AMT: | Supports Intel® vPro/ AMT 16.0 |
| TPM: | Supports dTPM 2.0 |
| Ethernet Ports* (Nuvo-9002): | 1x 2.5G Ethernet (I225-IT) and 1x Gigabit Ethernet (I219-LM) with screw-lock |
| Ethernet Ports* (Nuvo-9006): | 5x 2.5G Ethernet (I225-IT) and 1x Gigabit Ethernet (I219-LM) with screw-lock |
| PoE+: | Optional IEEE 802.3at PoE+ PSE for Port 3 to Port 6 (2.5GbE); 100 W total power budget |
| USB 3.2: | 1x USB 3.2 Gen2x2 (20 Gbps) port in type-C connector with screw-lock; 4x USB 3.2 Gen2x1 (10 Gbps) ports with type-A connectors; 2x USB 3.2 Gen1x1 (5 Gbps) ports with type-A connectors |
| USB 2.0: | 2x USB 2.0 ports |
| Video Port: | 1x VGA, supporting 1920 x 1200 resolution; 1x DVI-D, supporting 1920 x 1200 resolution; 1x DisplayPort, supporting 4096 x 2304 resolution |
| Serial Ports: | 2x software-programmable RS-232/ 422/ 485 ports (COM1/ COM2); 2x RS-232 ports (COM3/ COM4) |
| Audio: | 1x 3.5 mm jack for mic-in and speaker-out |
| SATA HDD: | 2x internal SATA port for 2.5” HDD/ SSD installation supporting RAID 0/ 1(Nuvo-9000E/ 9000P/ 9000DE); 1x hot-swappable 2.5" HDD tray (7mm HDD/ SSD) and 1x internal 2.5" SATA port (Nuvo-9000LP) |
| M.2 NVMe: | 1x M.2 2280 M key NVMe socket (PCIe Gen4x4) for NVMe SSD |
| PCI/PCIe: | 1x PCIe x16 slot@Gen3, 8-lanes PCIe signals (Nuvo-9002E/ 9006E); 2x PCIe x16 slots@Gen3, 8-lanes PCIe signals (Nuvo-9002DE/ 9006DE); 1x PCI slot (Nuvo-9002P/ 9006P) |
| Mini PCIe: | 1x full-size mini PCI Express socket |
| M.2: | 1x M.2 2242/3052 B key socket with SIM slot for M.2 5G/ 4G module |
| Expandable I/O: | 1x MezIO® expansion port for Neousys MezIO® modules |
Environmental
| Operating Temperature: | With 35W CPU -25°C to 70°C**; With 65W CPU configured as 35W TDP -25°C to 70°C **/***; With 65W CPU configured as 65W TDP -25°C to 50°C **/*** |
| Storage Temperature: | -40°C to 85°C |
| Humidity: | 10% to 90% , non-condensing |
| Vibration: | MIL-STD-810H, Method 514.8, Category 4 |
| Shock: | MIL-STD-810H, Method 516.8, Procedure I |
| EMC: | CE/FCC Class A, according to EN 55032 & EN 55035 |
| *: | Due to I225-IT specification limitation, for systems running 2.5G Ethernet link speeds, please limit the operating temperature to 60°C. |
| **: | For sub-zero operating temperature, a wide temperature HDD or Solid State Disk (SSD) is required. |
| ***: | For CPU operating at 65W mode, the max. operating temperature shall be limited to 50°C and thermal throttling may occur when sustained full-loading applied. |
Loading...
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)