The ILS-40M2-PI light controller enables compatible LED lights to be overdriven to produce greater light intensity. This LED controller can drive two independent output channels at 6 to 36 volts. Each channel can deliver up to 30 watts, with a combined maximum output of 40 watts.
We recommend using this controller with compatible Leimac 12 volt lights. However, it may also be connected to certain 24 volt lights with the use of a 2-to-3 pin adapting connector, which is sold separately.
Output Channels: | 2 |
Control Interfaces: | Manual, Parallel |
Control Method: | Voltage Control, Overdrive |
Input Power: | 24 +/- 10% VDC; 3.5 A max; 40A max inrush for 100 μs |
Output Power: | 6 - 36 VDC, 30W/channel max.; 40W combined total max. |
Output Pulse Duration: | 10 to 999 μs set in 1 μs increments |
I/O Type: | 12 - 24 VDC, NPN or PNP |
Inputs: | Voltage select (8 inputs); Trigger (2 inputs); Channel select, Write |
Outputs: | Alarm status (1) |
Weight: | 400g or less |
Operating Temperature: | 0 to 40°C |
Operating Humidity: | 20 to 85% RH, non-condensing |
Storage Temperature: | -20 to 65°C |
Storage Humidity: | 20 to 85% RH, non-condensing |
Maximum Altitude: | 2000 m or less |
Vibration Resistance: | 19.6m/s2 10 to 55Hz , 1 hour in each X , Y or Z direction |
Impact Resistance: | 98 m/s2 half-sine wave , 3 times in each X , Y or Z direction |
Light Connectors: | Two SMR-02V-B |
Conformance | CE, RoHS |
Leimac, Ltd. warranties lights against failure for 2 years from date of factory shipment, and against a 50% or greater decrease from the specified intensity for 1 year from date of factory shipment. Warranty shall not apply if failure is due to connecting the light to equipment or a power supply made by a third-party, or other factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)