The Leimac IDGC-150M4-24-T light controller is compatible with most constant voltage lights. It can deliver a total of 144 watts across its 4 output channels.
The IDGC light controllers with 24 VDC input power are available in three channel / power configurations, supporting up to 8 channels with 150 watts of power. All output channels are 24 VDC. All models have an Ethernet control interface as standard.
This controller has one high-speed input per channel that enables precision strobe control.
(The photo shown above is generally representative of the product family. Please refer to the drawing for dimensions and connectors.)
Loading...
Electrical
| Output Channels: | 4 |
| Control Interfaces: | Analog, Manual, Ethernet TCP/IP, Parallel, RS232 |
| Control Method: | Voltage Control, PWM |
| Input Voltage: | 24 VDC |
| Output Voltage: | 24 VDC |
| Output Power: | 144 W Total (not to exceed 70 W per channel) |
| Output Channels: | 4 |
| PWM Frequency: | ~125 kHz (256 levels) |
| Variable Delay Range: | 1 μs intervals between 0 and 9000 μs. (Add to electrical input response time.) |
| Variable Output "On" Range: | Output can be triggered to remain "on" for 0.1 to 999.9 ms, in 0.1 ms intervals |
| Control Inputs: | One per channel, 5 - 24 VDC, optically isolated, configurable for high or low activation |
Environmental
| Operating Temperature: | 0 to 40°C |
| Operating Humidity: | 20 to 70%, non-condensing |
| Storage Temperature: | -20°C to +65°C |
| Storage Humidity: | 20% to 85%, non-condensing |
| Vibration Resistance: | 19.6 m/s2, 10 to 55 Hz, 30 minutes each in the X-, Y-, and Z-directions |
| Shock Resistance: | 98 m/s2, three times each in the X-, Y-, and Z-directions |
Connectors
| Light Connector Type: | JST SMP-03V-BC |
| Light Connector Qty: | 4 |
| I/O Connector: | Omron XG4A-2031 |
| Ethernet Connector: | RJ-45 (Ethernet models only) |
| RS232 Connector: | Hirose HR10G-7R-4S73 (RS232 models only) |
Standards
| Conformance | CE (EN61010-1, EN55011, EN61000-6-2) |
Loading...
See Resources section below to download drawings.
Drawings
Hardware Manual
Sample Application Manual
Sample Application
Sign In or Register to unlock all links above.
Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)