The Leimac IDGC-30M8 light controller is compatible with most constant voltage lights. It can deliver a total of 30 watts across its 8 output channels.
The IDGC light controllers are available in a large number of different configurations. We offer an appropriate controller for each installation, with some models powering up to 8 independent channels at 150 watts total.
Most models may be configured to have either an Ethernet, RS232, or combined 8-bit parallel / 0 - 5 VDC analog interface.
This controller has one high-speed input per channel that enables precision strobe control.
(The photo shown above is generally representative of the product family. Please refer to the drawing for dimensions and connectors.)
Loading...
Electrical
| Output Channels: | 8 |
| Control Interfaces: | Analog, Manual, Ethernet TCP/IP, Parallel, RS232 |
| Control Method: | Voltage Control, PWM |
| Input Voltage: | 100 - 240 VAC, 50/60 Hz |
| Output Voltage: | 12 VDC or 24 VDC, depending on model |
| Output Power: | 30 W Total |
| Output Channels: | 8 |
| PWM Frequency: | ~125 kHz (256 levels) |
| Variable Delay Range: | 1 μs intervals between 0 and 9000 μs. (Add to electrical input response time.) |
| Variable Output "On" Range: | Output can be triggered to remain "on" for 0.1 to 999.9 ms, in 0.1 ms intervals |
| Input Response: | High Mode Off to On: < 60 μs; High Mode On to Off: < 10 μs Low Mode Off to On: < 10 μs Low Mode On to Off: < 60 μs |
| Auto MDI/MDIX: | Standard (for Ethernet models) |
Environmental
| Operating Temperature: | 0 to 40°C |
| Operating Humidity: | 20 to 70%, non-condensing |
| Storage Temperature: | -20°C to +65°C |
| Storage Humidity: | 20% to 85%, non-condensing |
| Vibration Resistance: | 19.6 m/s2, 10 to 55 Hz, 30 minutes each in the X-, Y-, and Z-directions |
| Shock Resistance: | 98 m/s2, three times each in the X-, Y-, and Z-directions |
Miscellaneous
| Programming Function: | Up to 16 steps |
Connectors
| Light Connector Type: | JST SMP-02V-BC (12 V) or JST SMP-03V-BC (24 V) |
| Light Connector Qty: | 8 |
| I/O Connector: | Omron XG4A-2031 |
| Power Connector: | IEC 60320 C14 "PC type" receptacle |
| Ethernet Connector: | RJ-45 (Ethernet models only) |
| RS232 Connector: | Hirose HR10G-7R-4S73 (RS232 models only) |
Standards
| Conformance | CE, UKCA, PSE |
Loading...
See Resources section below to download drawings.
Drawings, 12V
Hardware Manual
Drawings, 24V
Sample Application Manual
Sample Application
Sign In or Register to unlock all links above.
Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)