Image shows a Leimac IWDV-300S-48-C1

LTLC9231

Leimac IWDV-300S-48-C1

Light Controller, 1 Channel, 300W, 48V

Not available for purchase outside of US & Canada.
Please contact us for a quote.
300 watt supply
1-channel, multiple lights
Ethernet and parallel control interfaces
100 - 240 VAC input voltage

The Leimac IWDV-300S-48-C1 light controller is recommended for use with large lights that require a 48 volt supply. It can deliver 300 watts to its single output channel via two connectors.

This LED light controller enables light intensity to be adjusted via Ethernet, 10-bit parallel inputs, or the adjustment knob. There is a control input to enable/disable output power, and a control output to indicate fault.

This controller is compatible with 48 volt LED lights that are controlled by voltage. Multiple lights may be connected so long as their total power draw does not exceed the rated value.

The product photo above is generally representative of the product family. Please refer to the drawing for detailed information on this specific model.

Electrical

Output Channels: 1
Control Interfaces: Manual
Control Method: Voltage Control
Output Power: 300W
Voltage Control Resolution: 1000 levels (10-bit)
Input Voltage: 100-240VAC (allowable range : 90 to 264VAC), 50/60Hz
Over-voltage Category: Category II
Fault Detection: Output over-current, Output over-voltage, cooling fan stopped, abnormal temperature
Electrical Inputs: 10 inputs, 5 - 24 VDC, for selecting intensity; 1 input for light enable/disable
Electrical Outputs: 1 output, 5 - 24 VDC, to indicate fault

Mechanical

Cooling: Forced air

Environmental

Operating Temperature: 0°C to +40ºC
Storage Temperature: -20°C to +65ºC
Operating Humidity: 20 to 70%RH; no condensation
Storage Humidity: 20 to 85% RH; no condensation
Altitude: Under 2000 m

Connectors

Light Connector: JST ELR-06V, qty 2
I/O Connector: XG4A-2031
Ethernet Connector: RJ-45
Fan Connector: SMP-06V-BC, qty 2

Standards

Conformance RoHS, China RoHS, PSE, CE (EN61010-1, EN55011, EN61000-6-2)
Disabled resource link Drawing (PDF)
Disabled resource link Drawing (DXF)
Disabled resource link Manual
Disabled resource link Sample Software Application


Sign In or Register to unlock all links above.

Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.

Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)