Image shows a Leimac IDGB-30M8PG

LTLC9152

Leimac IDGB-30M8PG

Programmable Light Controller, 8 PWM Channels 30 W

This item has been discontinued. Please contact us for substitutes.
8-channel light controller
30 watt supply
100-240 VAC input voltage
Programming mode function

The Leimac IDGB-30M8PG-TP light controller is programmable and compatible with most constant voltage lights. It can deliver a total of 30 watts across its 8 output channels.

Configure each light channel's intensity, on-delay and on-duration independently, with support for up to eight channels. Four patterns can be saved for later recall via input signals or TCP/IP commands.

The IDBG-PG light controllers are available in a large number of different configurations. We offer an appropriate controller for each installation, powering up to 8 independent channels with up to 144 watts.

(The photo shown above is generally representative of the product family. Please refer to the drawing for dimensions and connectors.)

Loading...

Electrical

Output Channels: 8
Control Interfaces: Manual, Ethernet TCP/IP, Parallel
Control Method: PWM
Input Voltage: 100 - 240 VAC, 50/60 Hz
Output Power: 30 W
Output Voltage: 12 VDC or 24 VDC, depending on model
PWM Frequency: ~125 kHz (256 levels)
Variable Delay Range: 1 μs intervals between 0 and 9000 μs. (Add to electrical input response time.)
Variable Output "On" Range: Output can be triggered to remain "on" for 0.1 to 999.9 ms, in 0.1 ms intervals

Mechanical

Weight: 1000 g

Environmental

Operating Temperature: 0 - 40°C
Operating Humidity: 20 - 70%, non-condensing
Vibration Resistance: 19.6m/s2 10 - 150 Hz; Test direction X, Y, and Z; Test time: 30 min. (each direction)
Impact Resistance: 98m/s2 half-sine; Test direction X, Y, and Z; number of tests: 3 times

Connectors

Light Connectors: JST SMP-02V-BC (12 V) or JST SMP-03V-BC (24 V)
Ethernet Connector: RJ-45
I/O Connector 1: 26-pin (Omron XG4A-2631)
I/O Connector 2: 20-pin (Omron (XG4A-2031)
A/C Power: IEC 60320 C14 "PC type" receptacle

Please choose an output voltage

12V 12 VDC
24V 24 VDC

Not available for purchase outside of US & Canada.

Please sign in to check inventory.

Loading...


See Resources section below to download drawings.

Disabled resource link Drawing 12V (PDF)
Disabled resource link Drawing 12V (DXF)
Disabled resource link Drawing 24V (PDF)
Disabled resource link Drawing 24V (DXF)
Disabled resource link Manual (PDF)
Disabled resource link Application Manual (PDF)
Disabled resource link Sample Application


Sign In or Register to unlock all links above.

Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.

Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)